Raptor Engine Paint RED GLOSS spray 400ml

Professional Red Engine Block Paint in Raptor Engine Enamel spray can

Raptor Engine Enamel spray can is a professional heat resistant paint in the color red high gloss for spraying engine blocks and surrounding parts that can get hot. Thanks to advanced ceramic resins, this engine block paint is heat resistant up to 300°C. As a result, your engine block enjoys long-lasting protection against heat, corrosion, chemicals, oil and other Automotive fluids. This makes the Raptor Engine Enamel Paint spray can ideal for both car enthusiasts and professionals who want to paint their engine block red with a professional finish.

Engine block paint that is up to 5 times more abrasion resistant

This aerosol engine block paint from Raptor is up to 5 times more abrasion resistant than other paints. Thanks to its high quality, the red engine block paint stays beautiful and does not flake, crack or flake. This red engine block paint offers excellent adhesion to various metal substrates such as steel, aluminum and alloys.

Easy to use with professional results

The spray can is equipped with an anti-clogging nozzle, allowing you to easily apply multiple coats. Within just 2 hours, the paint is hand-solid and fully dry after 5 hours (at 20°C). For optimal curing on the car, it is enough to go for a drive after installation, with the heat from the brakes completing the process.

How to use Raptor Engine Paint Red spray can?

Want to give your engine block a new, durable and stylish look with the Raptor Engine Enamel Red spray paint can? Then follow the steps below for the best results.

1. Step 1: Provide a safe and well-ventilated work environment
   1. Work outside or in a well-ventilated area. Always wear protective gloves, goggles and a mouth mask while sanding and spraying. The spray mist and fumes can be harmful if used unprotected.
2. Step 2: Disassemble engine parts or shield the area
   1. For best results, it is recommended to disassemble engine parts from the car. Want to leave them in place? Then carefully tape off all surrounding parts such as hoses, cables and the bodywork to avoid overspray.
3. Step 3: Clean and degrease thoroughly
   1. Use a degreaser to completely remove dirt, oil, grease and engine fluids. A clean surface is essential for proper paint adhesion and durability.
4. Step 4: Lightly sand the surface
   1. Sand the surface of the engine block with 180- to 220-grit sandpaper to lightly roughen it. This promotes paint adhesion. For already painted or primed surfaces: use finer sandpaper such as 400 to 600-grit (primer) or P800-P1000 (painted parts). Then clean again.
5. Step 5: Apply a primer for engine block paint
   1. To ensure good and lasting adhesion, we recommend using the Raptor Engine Enamel Primer spray can. This serves as a primer for making the paint adhere to the engine block.
6. Step 6: Preparation of the spray can
   1. Make sure the spray can is at room temperature (between 15-25°C). Shake the spray vigorously for at least 2 minutes to mix the contents well. This prevents spraying problems and ensures an even result.
7. Step 7: Apply several thin coats
   1. Hold the spray can about 15 to 25cm away from the surface. Apply 2 to 3 thin coats at 10 minutes intervals (flash-off time). This will prevent drips and provide even coverage. Spray with gentle, overlapping motions.
8. Step 8: Finish with a clear coat
   1. For extra protection, finish your engine block paint with a clear coat. This protects the color even better against wear, discoloration and outside influences.
9. Step 9: Let the paint dry and cure
   1. After applying the final coat, let the engine block dry at room temperature for at least 10 hours. Ideally, you should let it dry overnight.

Features Raptor Engine Enamel Paint RED HIGH GLOSS

• Heat resistant paint up to 300°C
• Ceramic technology for extra durability
• 5x stronger than standard engine paints
• Excellent adhesion to steel, aluminum and primed surfaces
• Fast drying formula ensures the paint is dry within 30 minutes
• Clog-free spray head, ideal for 3D surfaces
• Resistant to oil, coolant and other automotive fluids
• Can be refinished without sanding within 1 hour
• Suitable for professional use and do-it-yourselfers