RANEX Rustbuster 1 liter
RANEX Rustbuster 1 liter is a bottle of rust remover to powerfully remove rust deep into the core of metal, iron, steel, stainless steel, chrome and copper. RANEX Rustbuster allows you to easily remove rust and restore the surface to its original color and appearance. Any kind of metal will look 100% rust-free and like new again with RANEX Rustbuster. After RANEX Rustbuster is dry, it is repaintable with any 1K and 2K primer or coating.
Applications RANEX Rustbuster
RANEX Rustbuster is a versatile rust remover. Besides being used as a rust remover, you can also use RANEX Rustbuster to remove scale, rust grindings and fly rust.
- Rust remover
- Removing rust scale
- Remove rust
- Removing rust spots
- Removing limescale
RANEX Rustbuster user manual
The RANEX Rustbuster instructions for use are easy for anyone to apply to derust metal. To properly use Rustbuster by RANEX, follow the steps below.
- Remove loose paint and rust.
- Clean the surface with a degreaser.
- Make sure the surface is dry.
- Apply RANEX Rustbuster with a roller or brush.
- Let RANEX Rustbuster dry for 24 hours.
- Finished!
Removing rust with RANEX Rustbuster
With RANEX Rustbuster you can also remove fly rust. To use RANEX as a fly rust remover you have to apply the product differently than you normally do. Follow the steps below to remove fly rust with RANEX Rustbuster.
- Apply RANEX Rustbuster with a brush or roller.
- Allow it to soak in for 15 to 30 minutes.
- Be careful not to let the product dry out!
- Rust removed? Rinse with water or wipe off with a wet cloth.
Characteristics RANEX Rustbuster 1 liter
- Powerful rust removal
- Removes rust deep into the core and pores
- Does not adversely affect coatings, lacquer, polyester or rubber
- Gives metal a temporary protection up to 6 weeks
- Provides a good base coat - adhesion to primer, primer or coating
- Ideal for removing rust in hard-to-reach areas
- Consumption
- 1 liter = 8m2 for heavy rust
- 1 liter = 30m2 of light rust, fly rust and rust streaks
