PPG DP7000 Air Dry Primer 3 liter
- Special air-drying primer that hardens very quickly
- Easy to sand primer, both wet and dry
- Complies with the European VOC directive
- Comes without hardener and thinner, so order these directly with it
PPG DP7000 Air Dry Primer 3 liter
PPG DP7000 Air Dry Primer in 3 liter can is a special air-drying primer that is fully cured within 60 minutes at 20°C. Because this PPG 2K primer is air drying, you do not need to heat or heat up the room in which you spray the primer. This saves you considerably on energy costs and increases productivity in the workshop.
Available in 3 colors
This 2K air dry primer from PPG is available in 3 colors, namely white, gray and dark gray. Depending on the color paint you want to spray over the PPG primer, choose the desired primer color. Choose from the value shades below:
- PPG D8561/E3 - G1 air dry primer WHITE
- PPG D8565/E3 - G5 air dry primer GREY
- PPG D8567/E3 - G7 air dry primer DARK GREY
PPG 2K air dry primer
Are you looking for a professional primer that dries quickly? Because this PPG 2K primer is air drying you increase efficiency and you can quickly finish the primer with a color of your choice. An additional advantage of the PPG 2K air-drying primer is that the risk of dust and dirt in the primer is minimized.
Mixing ratio PPG DP7000 Air Dry Primer
- Hardener: 3 parts to 1. Add 1 liter of hardener to 3 liters of primer.
- Thinner: add 10% thinner after mixing primer and hardener.
Characteristics PPG DP7000 2K air dry primer
- Professional 2K primer that is air dry
- Dry within 40 minutes at room temperature
- Fills irregularities, sanding scratches and small dents
- Easy to sand primer
- Mixing ratio: 3:1 with hardener
- Can be mixed with up to 10% dilution
- Potlife at 20°C is 30 minutes
- Recommended spray gap: 1.4 - 1.6 mm
- Recommended spraying pressure: 2 bar