MOTIP Oversprayable Anti Gravel in 1 liter Underscrew Can
-
100 days returns & exchanges
- Customer reviews: 4.25/5 (875 reviews)
MOTIP Anti Stone Chip in a 1.000ml is a sprayable preservative against chippings to treat the underside and visible parts of motor vehicles. Stone chip spray is re-sprayable with all lacquer systems and has an excellent rust prevention. Stone chip spray is resistant to weather influences and weak acids and bases, is sound-absorbing and remains flexible. MOTIP Anti Stone Chip is available in three colours, black, grey and white.
The following colors may show for technical reasons on each screen differently . They serve only as indications and therefore cannot be legally binding.
High quality protection for the bottom and visible body parts of vehicles.
Product Features
- To be applied with an UBC Spray-gun
- Re-sprayable with all lacquer systems
- Remains flexible
- Very good adhesion
- Resistant to weather influences
- Resistant to weak acids and bases
- Excellent corrosion prevention
- Sound-absorbing High solid content
Features
- Contents : 1.000 ml
- VOC-content : Approximately 33% w/w
- Coverage : 2 to 3 m²
- Dust dry : After approximately 30 minutes
- Tack free : After approximately 60 minutes
- Re-sprayable : After 2 hours
Usage
- Before use, carefully read the directions on the packaging and act accordingly.
- Remove loose old lacquer and rust and sand the surface.
- The surface should be clean, dry and free of grease.
- The can should have room temperature.
- Best processing temperature 15 to 25°C.
- Before use, shake the can.
- Working pressure 4 to 5 bar.
- Apply the Stone Chip Spray in the desired layer thickness.
- After drying, without sanding, re-sprayable with all lacquer systems.
- After use, clean the spray-gun with white spirit.
- The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.
| SKU | conf_M0000xxHS |
|---|---|
| Brand | MoTip |
| Components | 1K (1-component) |
| Content | 1 litre |
| Packing | 1 piece |
| Category | Stone Chip Repair |
Should clear coat be applied over car paint?
Yes, you should use clear coat over 1K automotive paint to protect the color. When buying clear coat, you have options such as high-gloss, satin, and matte, as well as 1K and 2K. 2K clear coat is the original factory high-gloss finish and is the most commonly chosen varnish.
Do shake it well before use and then you won't have to go to the gym.
