MOTIP Hobby & Home Effect Spray in 400ml Aerosol

High quality lacquer for the treatment of treated and untreated wood, metal, aluminium, glass, stone, Eternit, pottery and various types of plastic.

Product Features

• Very high opacity
• Not smudging
• Not resistant to weathering
• Excellent adhesion

Features

• Base: Acrylic resin
• VOC content: Approximately 93% w / w
• Solids: Approximately 7% w / w
• Gloss: Matt
• Yield: 1.25 to 1.75 m² approximately 0.5 m²
• Dust dry: After 5 to 10 minutes
• Touch: After 10 to 20 minutes
• Hardened / recoat: After 24 hours
• Heat resistant: Up to 110 ° C

User

1. Before use, read the instructions on the package and follow them.
2. The surface must be clean, dry and free of grease.
3. Remove loose old paint and rust, then sand and prime with a suitable substrate for the surface suitable MOTIP primer.
4. The primer after drying light sanding (600 grit).
5. The surface must be clean, dry and free of grease.
6. The aerosol at room temperature.
7. Ideal processing temperature is 15 to 25 ° C.
8. Before use, shake the aerosol for 2 minutes and spray a sample.
9. Distance to the to be treated surface approximately 25 to 30 centimetres.
10. Apply the paint in several thin layers.
11. Before applying the next layer, again shake the aerosol.
12. Not paintable with clear lacquer.
13. After use, clean the valve (spray can upside down and the nozzle for approximately 5 seconds).
14. The drying time depends on the ambient temperature, humidity and film thickness.