MOTIP DUPLI-COLOR Marble in 200ml Aerosol

Quality and properties

• Special aerosol resistant plastic quality
• No unpleasant odours
• No opaque paint, but net-like surface structure means the attachment is carried out on an existing paint or coloured surface
• Excellent adhesion
• Very fast drying
• Weather-proof, light, UV-resistant after refinishing with a clear coat

Physical and chemical properties

• Base: plastic
• Colour: dependent of substrate
• Odour: solvent
• Gloss: the measurement angle of 60 ° in accordance with DIN 67530 gloss: 80 GE
• Yield: Depending on consistency and colour of the substrate 200 ml is sufficient to provide about 1.0 to 2.0 m²
• Drying time (at 20 ° C, 50% relative humidity):
• Dust dry: after 5 minutes
• Touch dry after 30 minutes
• Recoat: 24 hours
• The drying time depends on the ambient temperature, humidity and the dry film thickness
• Temperature resistance: 80 ° C
• Sustainability / stability: 10 years storage (= 10 ° -25 ° C, relative humidity 60% max.)

User

1. Read before applying the warning texts carefully and attentively
2. Since the product has been developed exclusively for effect purposes and not for the protection of the substrate, the surface needs to comprise a colour layer or a different coloured surface.
3. The colour and lustre of the surface contributing to the effect.
4. The surface must be clean, dry and free of grease.
5. Cover the surrounding parts 
6. Shake for 2-3 minutes before use.
7. Spray a test area first on an inconspicuous area
8. Spray from about 30cm
9. The result depends on the creativity of the user and the desired effect. We recommend short spray of actions.
10. The marble structure can be covered to protect with a clear coat, for example DUPLI-COLOR Deco clear-coat gloss or matte, glossy or matte ZAPON Aerosol Cristal, Deco Matt varnish to protect

Tips for spraying

• Protect the object and the environment against overspray
• Temperature should be between +10 ° C and +25 ° C, max. Humidity of 60%
• Keep dry
• Protect from direct sunlight or other heat sources
• Use in places protected from the wind, only in dry weather, and in a well-ventilated area.
• More information can be found on the label