MOTIP DUPLI-COLOR Deco Effect Gold Leaf in 400ml Aerosol
-
100 days returns & exchanges
- Customer reviews: 4.57/5 (6,799 reviews)
Quality and properties
- High-quality acrylic quality
- Very high gloss
- Economical to use
- Very good coverage
- Good adhesion to many materials
- Good flowing allowing smooth surface
- Fast drying
- Suitable for spraying and repairing objects, both indoors and outdoors
- Weather-resistant, non-fading, UV-resistant
- Scratch, impact and shock resistant
Physical and chemical properties
- Basis of the binder: acrylate copolymers
- Colour: Gold
- Odour: solvent
- Gloss: the measurement angle of 60 ° in accordance with DIN 67530 gloss: 80 GE
- Yield: Depending on consistency and colour of the substrate 400 ml is sufficient to provide about 1.0 to 2.0 m²
- Drying time (at 20 ° C, 50% relative humidity):
- Dust dry: after 10 minutes
- Touch dry after 30 minutes
- Cured: after 2 hours
- Ready to brushing: after 48 hours
- The drying time depends on the ambient temperature, humidity and the dry film thickness
- Temperature resistance: 80 ° C
- Sustainability / stability: 10 years storage (= 10 ° -25 ° C, relative humidity 60% max.)
User
- Read before applying the warning texts carefully and attentively
- Remove rust and dirt, possibly primer application
- The surface must be clean, dry and free of grease.
- Deck surrounding parts well off
- If desired, use DUPLI-COLOR Effect Primer white
- Shake for 2-3 minutes before use.
- Spray a test area first on an inconspicuous area
- Apply from about 25 cm away in several thin cross-layers
- Do not spray on resin surfaces!
Tips for spraying
- Protect the object and the environment against overspray
- Temperature should be between +10 ° C and +25 ° C max. Humidity of 60%
- Keep dry
- Protect from direct sunlight or other heat sources
- Use in places protected from the wind, only in dry weather, and in a well-ventilated area.
- More information can be found on the label
Specifications of MOTIP DUPLI-COLOR Deco Effect Gold Leaf in 400ml Aerosol
| SKU | M263248 |
|---|---|
| Brand | MoTip |
|
Number of components
The designation 1K or 2K indicates how many components a product consists of and how it cures.
1K (1 component) – Ready to use and consists of a single component. Cures by exposure to air or moisture. User-friendly and ideal for standard applications. 2K (2 components) – Consists of two components that must be mixed before use. Provides a stronger and more durable finish. |
(1K) 1 component |
| Minimum Coverage m² | 1.5 m² |
| Weight | 400 g |
| Category | Effect coatings |
Frequently Asked Questions
How do you remove adhesive residues
Are there adhesive residues on your car from a sticker or car wrap? Removing adhesive residues from the car can be tricky without damaging the paint. To remove adhesive residues without scratching, it’s best to use a caramel wheel. This is a rubber grinding wheel specifically designed to remove adhesive residues without damaging the car paint
How much can I spray with a spray can?
A 400ml spray can covers approximately 1.5 to 2 m², depending on the material porosity and layer thickness. For larger projects or multiple layers, we recommend accounting for an extra 10% to ensure you don't run out halfway through.
Should clear coat be applied over car paint?
Yes, you should use clear coat over 1K automotive paint to protect the color. When buying clear coat, you have options such as high-gloss, satin, and matte, as well as 1K and 2K. 2K clear coat is the original factory high-gloss finish and is the most commonly chosen varnish.
