MOLYKOTE G-4700EP Synthetic Grease 1kg

MOLYKOTE G-4700EP Synthetic Bearing Grease for extreme loads

MOLYKOTE G-4700EP in a 1kg can is a professional synthetic bearing grease designed specifically for applications requiring extreme loads and challenging operating conditions. This MOLYKOTE grease combines a polyalphaolefin (PAO) base oil with a lithium complex thickener and contains added molybdenum disulfide (MoS₂) as a solid lubricant to provide additional protection under high pressure. The bearing grease is ideal for use in rolling and sliding bearings, gears, splines, guidance systems and other critical components that require reliability and durability

What do you use MOLYKOTE G-4700EP for?

Thanks to its exceptional properties, MOLYKOTE G-4700EP is ideally suited for mechanical systems exposed to heavy loads, vibrations, shocks and temperature changes. The special grease is used in roller bearings, plain bearing assemblies, pivot pins, gear drives, guides, spindles and splines, among others. The grease also performs excellently in demanding industrial plants, conveying machines and general moving components.

Benefits of MOLYKOTE G-4700EP Synthetic Grease

• Thanks to EP additives and molybdenum disulfide, this grease provides excellent protection against wear even under high loads and shock loads
• Functions reliably from -40 °C to +177 °C, ideal for both cold environments and high-temperature conditions
• The synthetic base oil and MoS₂ provide smooth operation and lower coefficient of friction, increasing energy efficiency
• High oxidation and aging resistance keeps the lubricating film stable, significantly extending maintenance intervals
• Forms a durable lubricating film that is not washed away by water, steam or vibration
• Suitable for use on metals, plastics and elastomers without risk of deterioration
• Effectively protects against moisture and aggressive environmental conditions even in demanding industrial applications

How to use MOLYKOTE grease for bearings

Clean the contact surfaces thoroughly so that old grease, dirt and contaminants are removed. Then apply a thin, even coat of MOLYKOTE G-4700EP with a brush or brush. If necessary, fill through grease nipples and pumps until excess grease visibly exits the outlet, so that the system is completely filled. Do not apply too much: a correct lubricating film is more effective than a thick layer of grease. For roller or ball bearings, preferably follow the manufacturer's instructions regarding amount and interval.

Technical properties of MOLYKOTE G-4700EP

• Consistency class (NLGI): 2
• Base oil viscosity at 40°C: approx. 150 cSt
• Temperature range: -40°C to +177°C
• Drop point: > 285°C
• Friction at low temperature (-40°C): ~ 0.024 Nm
• Wear (four-ball test, 40 kg, 1200 rpm): 0.64 mm
• Welding load (EP): ≥ 3,700 N
• Specific density (25°C): 0.87 g/ml

Features MOLYKOTE G-4700EP Bearing grease 1kg

• Fully synthetic PAO base combined with lithium complex thickener
• In 1kg can for easy and fast application
• Reinforced with molybdenum disulfide (MoS₂) for extra load carrying capacity
• Wide temperature range from -40°C to +177°C
• Very low friction at cold start
• Extremely high load carrying capacity (EP properties)
• Excellent wear and reduced corrosion resistance
• Compatible with many plastics and elastomers
• Even lubricating film, suitable for demanding applications