MIPA 20-80 Hardener/Thinner for Synthetic Enamel

For synthetic enamels, for accelerated drying at temperature 20-80°C

Remarks:

• Pot life 4 - 8 h (depending on temperature)
• Mixing ratio 20 - 25% to reach the spraying viscosity
• Do not use for hot spraying.
• Drying up to 80° C possible.
• Mipa Hardener reacts with humidity; therefore close tin immediately after use.
• All products should be disposed of in relation to the regulations of the environmental health authorities.
• Protect your environment!