Quality and properties
- High-quality acrylic lacquer, waterbased
- Less spray mist, therefore pleasant usage even indoor
- Suitable for polystyrene
- Pleasant vanilla scent, no odour of solvent
- Light-proof
- Durable gloss
- Hard-wearing, resiliant surfaces
- According to DIN EN 71-3 suitable for the painting of toys.
- Flaws made during the spraying can be corrected within 20 - 25 minutes after application. Within this space of time the „open“ paint layer can be washed off with water and soap.
- Also suitable for outdoor applications
- Self-cleaning valve
- Available in many colours, as primer and as high gloss and matt clear coat.
Physical and chemical data
- Basis: Acrylic, water-based
- Appearance/smell: Pleasant vanilla scent during spraying.
- Degree of gloss: measuring angle 60° after DIN 67530
High gloss shades: 80 gloss units
Satin gloss shades: < 45 gloss units
Matt shades: <15 GE measuring angle 60° after DIN 67530
- Efficiency:
Depending on condition and colour of the ground, 350 ml
Primer are sufficient for approx. 0.8 - 1.0 m²
Colours are sufficient for approx. 0.8 - 1.2 m²
Clear Lacquer are sufficient for approx. 1.0 - 2.0 m²
- Drying (at 20°C, 50% relative air humidity):
Dust-dry: after 15-20 minutes
Dry to touch: after 2 hours
Re-coatable / cured after 24 hours
The final surface hardnes is achieved after approx. 5 days. During this period the lacquered object should not be exposed to permanent wetness.
The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
- Disposal: Put only empty cans into the recycling bin. Bring cans with remainders of paint to the special refuse disposal.
- Storage stability:
4 years if appropriate storage provided (=10°-25°C, relative air humidity max. 60%).
Sedimentation: has not been noticed.
Store frost-protected!
- Content: Max. nominal volume = 400 ml (with 350 ml filling)
