Bostik Born2Bond GA-WL Liquid Gasket 50ml

Bostik Born2Bond GA-WL Liquid Gasket 50ml for durable sealing

Bostik Born2Bond GA-WL Liquid Gasket 50ml is a high-quality flange gasket specifically designed for sealing and locking metal flange connections. Thanks to its high viscosity and medium strength, this liquid gasket creates a reliable, flexible joint that resists vibration and temperature changes well. This also makes Born2Bond GA-WL flange gasket suitable for active and passive metal, ideal for industrial maintenance and installation.

What does Bostik Born2Bond GA-WL Liquid Gasket use for?

This GA-WL Born2Bond Liquid Gasket from Bostik is used to seal and lock metal flange connections in systems where reliability of both connection and seal is essential. Examples include motors, pumps, compressors, liquid and gas storage, gearboxes and hydraulic installations. The product provides 100% surface contact and prevents leakage, micro-movement and loosening due to vibration.

Applications of Born2Bond GA-WL at a glance:

• Sealing metal flange joints in motors and drives
• Used in pumps, compressors and hydraulic systems
• Applicable in storage of liquids and gases
• Maintenance and new construction where flexible sealing and locking is required

How to use Born2Bond GA-WL for optimum results

For optimum results, apply Bostik Born2Bond GA-WL Liquid Gasket to clean, dry and degreased metal flange surfaces. Clean with an appropriate degreaser beforehand. Apply product as a continuous bead or via screen pressure to one flange section, install immediately and tighten to specification. Allow to cure before applying pressure or load.

Benefits Bostik Born2Bond GA-WL Flexible Gasket are:

• One-component solution replaces traditional gasket
• High viscosity and excellent adhesion ensure reliable sealing
• Resistant to vibration, temperature changes and chemical stresses
• Suitable for active and passive metal in a flexible application
• Creates 100% surface contact and prevents micro-movement

Features Bostik Born2Bond GA-WL Liquid Gasket 50ml

• In convenient 50ml vial for professional use
• Red color (UV fluorescent) for recognition of Flexible variant
• Anaerobic dimethacrylate ester base for very strong adhesion
• Temperature range from -55°C to +230°C for wide application in industrial environments
• High viscosity (approx. 60,000 to 100,000 mPa-s) for filler clearance up to ~0.25 mm
• Hand strength after about 40 minutes at 20°C; fully cured in 24 hours
• Suitable for metal flanges of iron, steel and aluminum, replaces preformed gaskets
• Non CLP-rated for improved working environment and easier EHS assessment