Wynns Exhaust Repair Putty 250 gram

Wynns Exhaust Repair Putty

Wynns Exhaust Repair Putty is a sealant to repair an exhaust system. Wynn's exhaust paste provides a permanent seal to the exhaust system, making it closed again. Also, the paste for your exhaust has a high filling power to fill and level stone chip damage or other dents and pits. After curing, you can sand the exhaust paste and refinish with heat-resistant paint or exhaust lacquer. This exhaust paste is heat resistant up to 1,000 degrees Celsius.

How to use exhaust paste

In a few simple steps, you can use exhaust paste. Use the steps below to apply the paste to your exhaust in the right way.

1. Remove loose dirt and rust from the surface.
2. Moisten the surface.
3. Apply the paste to the exhaust with a putty rubber or putty knife. If desired, you can soften the exhaust paste with water.
4. Allow the paste to cure by letting the exhaust and engine idle for several minutes.
5. After the exhaust paste has hardened, you can finish it with heat-resistant paint.

Features Wynn's Exhaust Paste

• Exhaust paste to seal holes and cracks in an exhaust
• Exhaust paste is heat resistant up to 1000°C
• Ready for use
• Paste is asbestos free