U-POL DOLPHIN Glaze 2K Finishing Putty 440ml + Hardener

U-POL DOLPHIN Glaze 2K Putty for Super Tight Finish

U-POL DOLPHIN Glaze 2K Putty is a high-quality and self-levelling putty that has been specially developed to fill the smallest irregularities, scratches and pinholes before repainting. This 2K filler is characterized by a self-levelling effect, as a result of which the filler automatically smoothes out and less sanding is required. This allows you to achieve a tight and professional end result in a short time, without unwanted air bubbles or holes in the surface. Whether you are working on a full restoration or a small damage repair job: with Dolphin Glaze you choose reliability, efficiency and top quality.

Professional finishing putty for different substrates

This DOLPHIN Glaze to U-POL is a professional finishing putty for on different substrates. One of the biggest advantages of the U-POL DOLPHIN Glaze is its wide applicability on various substrates. This self-leveling finishing putty has excellent adhesion to steel, aluminum, galvanized steel, SMC, fiberglass, plastic and original coatings, among others. This makes the product suitable not only for professional damage repair, but also for hobbyists working on cars, motorcycles or other surfaces. The semi-flexible formula provides a durable bond that resists movement and temperature fluctuations. This ensures that your repair will remain beautiful over the long term.

Fast curing and time-saving sanding process

Thanks to its innovative composition, Dolphin Glaze stands out for its fast curing. Depending on the ambient temperature, the gelling time is only 4 to 7 minutes and sanding can be done in as little as 6 to 15 minutes. This makes the product ideal for workshops where speed and efficiency are important. Because the putty also cures tack-free, the surface remains clean and dust-free, which greatly facilitates the subsequent painting process. The result: less waiting time, faster advancement to the next step and higher productivity.

Easy mixing and processing without air entrapment

Mixing the Dolphin Glaze is easy: add about 2% hardener and mix carefully until homogeneous. For mixing, it is recommended to use an Onion Board in order to prevent air entrapment and ensure optimal processing of the putty. The self-leveling properties then ensure that the product cures tightly and evenly, without the need for additional operations. Because the surface is very easily sandable, you save not only time but also sanding materials.

Pinhole-free putty

Whether you need to repair a small damage spot, restore a classic car or perform professional damage repair, the U-POL DOLPHIN Glaze offers a reliable solution. Thanks to its fast curing, easy application and durable adhesion, this product is used by professional bodyshops worldwide. The result is always a tight, smooth and pinhole-free surface that is immediately ready for the next step in the spray process.

Features U-POL DOLPHIN Glaze 2K Putty 440ml + Hardener

• Self-levelling 2K filler for a smooth finish
• Fast curing and sandable within 6 to 15 minutes
• Tack-free surface that remains clean and dust-free
• Ultra-fine finish for pinhole-free results
• Excellent adhesion to steel, aluminum, plastic and more
• Easy to mix and process with 2% hardener
• Very easy to sand and time-saving in use
• Compatible with various paint systems