Rust-Oleum Aluminium Metallic Topcoat in 500ml aerosol
- 100 days returns & exchanges
- Customer reviews: 4.34/5 (800 reviews)
Aluminium metallic topcoat in an aerosol
Rust-Oleum Aluminium Metallic Topcoat in an 500ml aerosol combines a bright metallic appearance with the durable protection of a standard topcoat. It is a metallic spray paint, for bare metal or as a finish over suitable primer and available in two colours: Sparkling Aluminium (2111) and Silver Gloss (Bright) Aluminium (2115)
Hard Hat Metallic TopCoat aerosols are based on a proved industrial Acrylic binder to provide a quality fast drying industrial enamel finish which one would expect from Rust-oleum. Hard Hat TopCoat aerosols are suitable for use on new bare metal, wood and galvanised steel surfaces and are intended to be applied on small areas or for touch up. Often used over Galva Zinc Primer. Finish with transparent Top Coat reference 2500 Top Coat for the best result.
What's special about Hard Hat Top Coat paints?
- They are very fast drying and are supplied in an aerosol for spray finishing convenience.
- Can be handled after 30 minutes (at 20 degrees C)
- They are heat resistant to 100 °C.
- Have higher opacity of cheaper spray paints.
- They provide a longer lasting coating due to the high quality resin and pigments selected by Rustoleum.
- They provide a tough frexible film that resists chipping, cracking and peeling.
- As a consequence these aerosols have been specified by Consulting Engineers on major building projects in Ireland and abroad.
Higher quality pigments for a longer gloss and colour retention. The tough flexible film resists chipping, cracking and peeling.
- Metallic spray: nice finish, good protection
- For bare metal and galvanised steel
- Usable as topcoat on zinc primers and galvanised
- Finish with transparent topcoat for the best result Ideal for machinery, pumps, toolboxes, etc.
- Available in sparkling and gloss
- Heat-resistant up to 100 °C
- For use on: New, bare steel, blasted steel or galvanized steel surfaces
- Formulation: Solvent-based
- Binder: Acrylic
- Finish: Metallic
- Coverage: 2,5 m² per spray can at 25 μm dry
- Touch dry (at 20˚C): 15 minutes
- Recoatable (at 20˚C): Within 1 hour or after 48 hours
- Application: Aerosol
- VOC level: 842 grams/liter
- Pack size: 500 ml
Blanke lak over de aluminium metallic verf
Wilt u de duurzaamheid van de Rust-Oleum aluminium metallic verf extra verlengen en de lak extra beschermen tegen UV en invloeden van buitenaf? Dan raden wij aan de lak af te spuiten met de Rust-Oleum hoogglans blanke lak (Rust-Oleum nummer 2500). Dit is een sneldrogende blanke laklaag die zorgt voor een hoogglans uitstraling en optimale bescherming van de verf.
Kenmerken van de Rust-Oleum aluminium metallic verf in spuitbus
Rust-Oleum Hard Hat aluminium verf beschikt over krachtige eigenschappen. Wij zetten deze eigenschappen graag voor u op een rijtje.
- Hoogglans aluminium of metallic aluminium uitstraling
- Kan gebruikt worden op blank metaal, gegalvaniseerde oppervlakken, zinkprimers en antiroest primers
- Voor de beste hechting van de lak adviseren wij een primer te spuiten
- Af te spuiten met de Rust-Oleum hoogglans blanke lak (Rust-Oleum nummer 2500)
- Kleefvrij na 15 minuten
- Hanteerbaar na 30 minuten
- Hittebestendig tot 100°C
- Kleuren: Sparkling Aluminium - fonkelend aluminium (Rust-Oleum nummer 2111) en Silver Aluminium - aluminiumglans (Rust-Oleum nummer 2115)
| SKU | conf_RO-ALU-LAK |
|---|---|
| Brand | Rust-Oleum |
| Content | 500ml |
| Packing | 1 piece |
| Components | 1K (1-component) |
| Category | 1K Car Paint |
How much can I spray with a spray can?
A 400ml spray can covers approximately 1.5 to 2 m², depending on the material porosity and layer thickness. For larger projects or multiple layers, we recommend accounting for an extra 10% to ensure you don't run out halfway through.
Should clear coat be applied over car paint?
Yes, you should use clear coat over 1K automotive paint to protect the color. When buying clear coat, you have options such as high-gloss, satin, and matte, as well as 1K and 2K. 2K clear coat is the original factory high-gloss finish and is the most commonly chosen varnish.
How many layers of car paint should I apply?
The number of layers of automotive paint you need to apply depends on the coverage of the color. Usually, 3 layers are sufficient. However, for lighter color paints that have less coverage, we recommend applying an additional layer of color until you achieve the desired result.
How long should car paint cure?
The curing time for automotive paint depends on temperature, humidity, and layer thickness. At higher temperatures, the curing process is faster compared to lower temperatures. Additionally, 1K automotive paint dries faster than 2K automotive paint.
What is the drying time for car paint?
The drying time of automotive paint is determined by 3 factors: layer thickness, temperature, and humidity. We recommend monitoring this yourself until the paint is dust-dry. Once this is the case, the paint can be over-sprayed with clear coat or handled!
