Pearl White spray paint - 2 aerosol
Pearl White Paint in Aerosol
Pearl White paint in aerosol contains professional paint with mother of pearl effect. The pearlescent paint white is filled in a professional spray can that guarantees a tight atomization of the pearlescent white paint. This set consists of 2 sprays, namely a spray can with a special pre-color for the white pearlescent paint and a spray can of pearlescent paint in the color white itself.
White paint with mother-of-pearl effect
Looking for a professional paint in the color white with pearl in it? This white pearlescent lacquer is a high-quality, hard-wearing and well-covering paint with pearl effect. There is a beautiful pearl glitter effect in this white paint that creates a bright, beautiful and luxurious look!
How do I spray white pearlescent car paint? A 3 coat system!
Pearl white car paint is a 3 layer system that can be sprayed by anyone by themselves. To spray a white pearlescent paint yourself, you need to know the right steps to get a good, sleek and professional result. Follow our step-by-step guide on how to spray pearlescent white car paint.
- Clean the surface you want to spray with a professional degreaser.
- Lightly sand the surface so that good adhesion can take place.
- Again, degrease the surface well so that all the sanding dust, dirt, grease and dust is gone.
- Shake the spray can well before use and make sure both the room and surface are at room temperature.
- First spray the pre-color for the white pearlescent paint.
- Spray the paint in an initial thin mist coat, followed by 2 full coats until the desired coverage is achieved.
- Let the pre-color dry until it is dust dry. Do not sand the paint!
- Shake the second spray can of pearlescent paint well before use.
- Spray the pearlescent paint again in a first thin spray coat, followed by 2 full coats. If desired, you can finish with an additional thin spray coat.
- Let this lacquer also dry well until it is dust dry.
- Spray the pearlescent lacquer white with 2K clear coat for maximum protection.
- Let the clear coat cure completely for 24 hours in a room that is clean and dust-free!
How is this lacquer supplied?
This set consists of 2 professional sprays that are specially matched. The 2 sprays are filled with professional automotive lacquer in a special High Pressure spray can. With this you are able to spray the white pearlescent lacquer professionally and tightly yourself, without the need for a paint sprayer! When you buy this set you will receive the following sprays.
- Pre-color for white pearlescent lacquer
- Mother-of-pearl paint white
Do I need a primer?
A primer is only necessary when the surface is untreated. If there is already a varnish on it in good condition, a primer is not necessary and just light sanding is sufficient. Is the old paint layer peeling off the surface or is the substrate completely bare? Then it is necessary to spray a primer that ensures the adhesion of the white pearl lacquer. Which primer you need? Check out our overview below.
- Plastic or plastic: plastic primer.
- Metal or iron: 2K epoxy primer
- Aluminum: 1K or 2K epoxy primer
- Galvanized steel: 2K epoxy primer
- Stainless steel: 1K filler primer
Spray the pearlescent paint white with clear coat
Have you sprayed the pearlescent paint white opaque and are you satisfied with the result? Then you need to spray the pearlescent paint white with a clear coat. 2K clear coat is a protective layer that protects the pearl white color from scratches, impacts, weather, gasoline and other outside influences. In addition, a 2-component clear coat also ensures that the color will not yellow or weather.
Features of the Pearl White Spray Paint
- With professional lacquer from MIPA
- Color: pearl white
- High opaque lacquer
- Professional quality paint (acrylic)
- Fast drying
- Should be sprayed with clear lacquer