MIPA Mipatherm Black Heat Resistant Paint 400ml aerosol

Mipa Mipatherm black matte heat resistant paint from MIPA

MIPA Mipatherm is a black matt heat resistant paint in an aerosol can, that is resistant to heat and high temperatures. This paint can withstand temperatures of up to 800°C, has a high covering power and dries quickly. This special paint is the perfect finish for surfaces subject to high temperatures.

What is MIPA Mipatherm heat resistant paint used for?

MIPA Mipatherm heat resistant paint is suitable for use as a finish on surfaces that heat up or reach high temperatures. This finish is widely used for spraying the following objects or surfaces:

• Exhaust pipes
• Brake callipers
• Engine block
• Manifolds
• Cylinders
• Barbecues
• Ovens  
• Stoves

Do you want to apply black heat resistant paint?

The MIPA Mipatherm heat resistant paint is easy to apply. Follow the step-by-step plan below.

1. Shake the can vigorously before use.
2. Use at a temperature between 15 and 25°C.
3. Maintain the spray cap at a distance of 20 to 30 cm from the surface.
4. Spray 2 to 3 thin coats. Be careful, when spraying layers too thicky, the finish may shine!
5. Allow 10 minutes to evaporate between coats.
6. After the last coat, you must allow the paint to harden.
7. Finished spraying? Turn the can upside down and squeeze the nozzle until only the propellant comes out. Now the nozzle is clean, and you can store the remaining product.

Features of the MIPA Mipatherm black heat-resistant paint

• Resistant up to 800°C
• Dries matt black
• Deep black colour RAL 9005
• Does not discolour
• Strong adhesion
• Fast drying            
• Drying time of the MIPA Mipatherm black heat-resistant
  • Dust free: 15 min at 20°C
  • Manageable: 30 minutes at 20°C
  • Fully cured after 3 hours at 20°C