GTECHNIQ COV2 Aero Coat Ceramic Coating 50ml

Gtechniq C0 Aero Coat ceramic coating with strong anti-adhesion

The Gtechniq C0 Aero Coat is a high-quality ceramic coating for cars originally developed to minimize the adhesion of foreign materials and dirt on race cars as much as possible. Thanks to the strong anti-adhesion properties, dirt is less likely to stick to the treated surface. C0 combines this effect with a beautiful shine, good water repellency, and extra resistance to swirls. Although the coating is particularly suitable for race and track cars, C0 can also be excellently used on street cars and offers a lifespan of up to 2 years.

Ceramic coating for race car and street car

Gtechniq C0 Aero Coat is developed for conditions where a clean and smooth surface is desired. The coating has strong anti-adhesion properties and also offers a hydrophobic effect with a contact angle of 110°. This effectively repels water and keeps dirt from easily adhering to the surface. C0 also provides a beautiful shine and offers with a hardness of 6H extra resistance against the formation of swirls.

Up to 2 years protection for car paint and gelcoat

C0 Aero Coat can be applied to both car paint and gelcoat and offers on street cars a durability of up to 2 years. The coating can be used independently, but is also suitable as a topcoat over other permanent Gtechniq paint protections. This makes C0 interesting for detailers and car enthusiasts who, in addition to ceramic paint protection, are specifically looking for strong anti-adhesion and good hydrophobic properties.

How do you use Gtechniq C0 Aero Coat?

Shake C0 well before use and work outside direct sunlight. Apply the product with the included AP2 applicator to a large panel or several smaller panels. Let the coating sit for about 2 to 3 minutes and then carefully remove the residue with a suitable microfiber cloth. Polish the surface again with a clean cloth. C0 is relatively viscous and therefore requires more effort in polishing than other Gtechniq coatings. Allow the coating to cure for at least 12 hours before exposing the vehicle to weather conditions.

Features of Gtechniq C0 Aero Coat

• Ceramic coating with strong anti-adhesion properties
• Originally developed for race and track cars
• Also suitable for street cars
• Provides up to 2 years of protection
• Good hydrophobic and water-repellent properties
• Water contact angle of 110°
• Provides a beautiful shine
• 6H hardness for extra resistance against swirls
• Suitable for car paint and gelcoat
• Can be used as a standalone coating or topcoat
• Minimum 12 hours curing time
• Use within 3 months after opening
• Available in 30ml and 50ml