FINIXA Eccentric Hand Palm Sander - 150mm
Eccentric hand palm sander of FINIXA features a 150mm multi-hole disc with dust extractor for dust-free sanding every surface! This ergonomically shaped pneumatic palm sander is ideal for sanding the repair sector and industry.
This eccentric hand palm sander is very light in weight and has a powerful motor that makes grinding faster and cheaper! This FINIXA pneumatic palm sander has a speed of 20,000 rpm with an air consumption of only 112 litres per minute!
Some characteristics of the FINIXA Eccentric Hand Palm Sander:
- Built-in speed, adjustable from 0 - 20,000 rpm
- Vibration free and reliable thanks to four layers: two above and two below the engine
- Composite Engine and rotor blades
- Built-in option whether or not vacuum-free work
- Because of the specific technical characteristics of water-borne paint systems is a finer and more uniform sanding required to achieve the desired result. It has been found that only a finer sandpaper often does not give the desired result. Therefore FINIXA brings a specific sander in the market that provides an eccentric hit of 2.5 mm for an extremely fine and uniform sanding pattern. Ideally suited for use in waterborne paint systems, out-mist areas, matting and spot repair.
FINIXA Eccentric Hand Palm Sander is available in two different versions:
- 2,5 mm stroke:
- Suitable for fine finishing as the matting of the surface. Preferably, to be applied with abrasive grains of P500 to P3000. The small orbit, combined with the high speed and the correct abrasive grain ensures a high level of finish and make the next steps (spray) easier and the results better
- 5mm sanding stroke: All-rounder. Is suitable for sanding and old paint to apply (preferably) P100-P400 grit.
This FINIXA hand palm sander comes complete with a 15-hole Velcro pad!