CROP Bitumen Undercoating BLACK - Can 1 liter

Bitumen Underbody Coating BLACK

Bitumen Underbody Coating BLACK in 1 liter can from CROP is the best product to protect the underside of your car from stone chips, road salt, rust, corrosion, rain, water, mud, sand, gravel and other road surface contamination. Thanks to its high quality, this black bitumen coating is highly resistant to scratches and stone chips caused by flying stones, gravel or other pollution. In addition, the CROP professional bitumen coating provides a good car insulation that reduces vibrations, noise and sound to a maximum extent so that the interior becomes quiet. Thanks to its unique formula, you apply the bitumen coating yourself to the underside of your car with a brush, roller or a UBC bodyschutz spray gun.

Car floor protection

Car floor protection is done with a bodyschutz like this one! With the CROP bottom protection for your car, the chassis and metal remains rust free and the parts maximally protected. In addition, this bitumen coating ensures that the underside gets excellent anti-scratch protection. With this professional bodyschutz, you will enjoy the best car bottom protection. Thanks to this UBC, you yourself can treat your car bottom with the best protection against all outside influences. This will instantly increase the reliability of your car.

Black bitumen coating for car

Are you looking for a black bitumen coating for your car to protect the wheel arches, box beams and the entire underside of the bottom of your car? This professional bitumen coating from CROP is a bodyschutz that is black in color and remains elastic. The thick, rubbery coating provides long-term protection against moisture, rust and chemicals, extending the life of your car and preserving its value. Thanks to the dark color, this black bitumen coating restores your car to a factory original OEM appearance that is very high-grading.

How to treat car bottom with coating?

Car floor treatment with black coating you do yourself in 5 steps. With the step-by-step plan below, you will again protect wheel arches and the entire underside of your car with a bitumen coating.

1. Remove old paint and rust with a wire brush or by sanding.
2. Clean the surface with a good degreaser.
3. Apply the bitumen coating in the desired thickness with a brush, paint roller or UBC spray gun.
4. For best results, apply the coating at a temperature between 10°C and 25°C
5. The drying time depends on temperature, humidity and layer thickness

Characteristics CROP Bitumen Underbody Coating BLACK

• Bitumen underbody coating for professional use
• Permanently elastic so the coating does not crack or break
• Black UBC for a factory original OEM appearance
• Undercoating has a very strong adhesion without primer
• Offers the car floor a good protection against rust and stone chips
• Good resistance to acids and bases
• Also provides excellent sound deadening and vibration reduction
• Not paintable because of the bitumen in the coating
• Drying time: 2 hours at 20 degrees Celsius