3M Platinum Plus 2K Glaze + Hardener

3M 31180 Platinum Plus 2K Putty

3M Platinum Plus 2K Glaze + Hardener is two-part premium selfleveling finishing glaze that can repair minor imperfections on properly prepared substrates such as galvanized steel, steel, aluminum, fiberglass, wood, SMC, E-coat, OEM topcoats, cured/sanded epoxy and urethane primers. This finishing glaze cuts the sanding time to as little as 15 minutes.

2K Glaze for cutting sanding time

3M Platinum Plus 2K Glaze can repair minor imperfections such as scratches, pinholes and door dings. This polyester finishing glaze can be used as a finish coat over body filler to fill pinholes and low filled areas. It may be applied on properly prepared steel, aluminum, galvanized, SMC, fiberglass and OEM paint surfaces. 3M™ Platinum Plus Glaze may also be used for industrial and architectural surfaces needing minor surface repairs.

3M Platinum Plus Glaze can be used on

• Metal
• Plastic
• Fiberglass
• Aluminum
• Wood
• Galvanized steel
• Steel
• SMC
• Primer
• Ceramic
• E-coat
• OEM topcoats

Features 3M 31180 Platinum Plus Glaze

• Self-leveling formula is excellent for skim coating and offers good vertical hang
• Easy-sanding properties
• Strong adhesion properties
• Stain free
• Tack free
• Formulated to be pinhole free

How do I use 3M 31180 Platinum Plus?

• Mix putty with 2 to 3% hardener. When in doubt, use a scale. Too much hardener not only causes too fast hardening but can also lead to detachment through paint.
• Carefully mix the putty with hardener and avoid withdrawing air. Air bubbles result in imperfections during application and sanding.