3M 26312 PPS 2.0 Kit Midi 400ml - 125mu - 50 inner cups + lids
-
100 days returns & exchanges
- Customer reviews: 4.58/5 (7,041 reviews)
3M 26312 PPS 2.0 Kit Midi 400ml - 125 micron
3M 26312 PPS 2.0 Kit Midi, consisting of 50 inner cups 400ml, 50 lids with 125mu paint filter, 32 sealing plugs, and 1 outer cup. This 3M 26312 PPS 2.0 Midi Kit cup system is for spraying a bumper, hood, roof, or 2 panels where a maximum of 400ml of paint is needed. The 3M PPS 2.0 lid with 125 micron paint filter is specially designed for filtering clear coat while you are spraying with your top cup paint sprayer.
What is the 3M PPS 2.0 Midi spray cup system used for?
The 3M PPS 2.0 Midi can be used for spraying parts and surfaces where a maximum of 400ml of paint is needed. Think of spraying a front bumper, rear bumper, hood, trunk lid, roof, or 2 body panels. The Midi spray cup system of 3M PPS 2.0 can be used to spray paint at any angle.
How is the 3M 26312 PPS 2.0 Kit delivered?
- 50 Inner cups 400ml
- 50 Lids with 125 micron paint filter
- 32 Sealing plugs
- 1 Outer cup
How to use the 3M PPS 2.0 spray cup system?
The 3M PPS 2.0 spray cup system is easy to use. In just a few steps, you will know how to properly use the disposable cup system from 3M. Follow the steps below for this.
- Place the disposable inner cup in the outer cup.
- Mix the paint directly in the mixing cup.
- Put the lid on the cup, press down and turn a quarter turn to lock the system.
- Make sure you have the right 3M PPS 2.0 adapter for your paint sprayer to connect the system to your spray gun.
- Done spraying? Disconnect the air hose and turn the paint sprayer upside down to let the remaining paint run back into the cup.
- Store the 3M PPS 2.0 cup by sealing it with the included sealing plug.
Specifications of 3M 26312 PPS 2.0 Kit Midi 400ml - 125mu - 50 inner cups + lids
| SKU | 3M-26312 |
|---|---|
| Brand | 3M |
| EAN | 04054596313354 |
| Packing | 1 set |
| Number of microns | 125 µm |
| SKU | 3M-26312 |
|---|---|
| Brand | 3M |
| EAN | 04054596313354 |
| Packing | 1 set |
| Number of microns | 125 µm |
| Content | 400 ml |
| Category | 3M PPS 2.0 |
When is this spray cup suitable for you?
Read more Read less
- For spraying base coat and clear coat: With a 125-micron filter, this cup is perfect for most common base coats and clear coats. You get a smooth result without unwanted particles.
- If you want to change colors quickly without much cleaning: The PPS 2.0 system makes it possible to replace the inner cup. This saves a lot of time when changing colors and reduces the consumption of solvents for cleaning.
- Less suitable for very thick primers or putty: For materials that are thicker than regular paints, such as some fillers or primers, a 125 micron filter may be too fine. In that case, choose a spray cup with a 190 micron filter to prevent clogging.
