3M 26026 PPS 2.0 Kit Standard 650ml - 125mu - 50 inner cups + lids

3M 26026 PPS 2.0 Kit Standard 650ml - 125 micron

3M 26026 PPS 2.0 Kit Standard, consisting of 50 inner cups 650ml, 50 lids with 125mu paint filter, 32 sealing plugs, and 1 outer cup. This 3M 26026 PPS 2.0 Standard Kit cup system is for spraying multiple car parts and panels where a maximum of 650ml of paint is needed. The 3M PPS 2.0 lid with 125 micron paint filter is specially designed for filtering clear coat while you are spraying with your gravity feed spray gun.

What to use the 3M PPS 2.0 Standard spray cup system for?

The 3M PPS 2.0 Standard can be used for spraying multiple parts and larger surfaces where you need a maximum of 650ml of paint. Think of spraying multiple body parts on the car. The Standard spray cup system of 3M PPS 2.0 can be used to spray paint at any angle.

How is the 3M 26026 PPS 2.0 Kit delivered?

• 50 Inner cups 650ml
• 50 Lids with 125 micron paint filter
• 32 Sealing plugs
• 1 Outer cup

How to use the 3M PPS 2.0 spray cup system?

The 3M PPS 2.0 spray cup system is easy to use. In just a few steps, you will know how to properly use the disposable cup system from 3M. Follow the steps below for this.

1. Place the disposable inner cup in the outer cup.
2. Mix the paint directly in the mixing cup.
3. Put the lid on the cup, press down and turn a quarter turn to lock the system.
4. Make sure you have the right 3M PPS 2.0 adapter for your spray gun to connect the system to your spray gun.
5. Done spraying? Disconnect the air hose and turn the spray gun upside down to let the remaining paint run back into the cup.
6. Store the 3M PPS 2.0 cup by sealing it with the included sealing plug.