3M 26024 PPS 2.0 Kit Large 850ml - 200mu - 50 inner cups + lids

3M 26024 PPS 2.0 Kit Large 850ml - 200 micron

3M 26024 PPS 2.0 Kit Large, consisting of 50 inner cups 850ml, 50 lids with 200mu paint filter, 32 sealing plugs, and 1 outer cup. This 3M 26024 PPS 2.0 Large Kit cup system is for spraying the entire side of a car or large panels where a maximum of 850ml of paint is needed. The 3M PPS 2.0 lid with a 200 micron paint filter is specially designed for filtering any water-based and conventional paint or varnish while you are spraying with your top cup spray gun.

What is the 3M PPS 2.0 Large spray cup system used for?

The 3M PPS 2.0 Large can be used for spraying full panels, parts, and larger surfaces where you need a maximum of 850ml of paint. Think of spraying the entire side of a car, the complete front or rear including bumper and panels. The 3M PPS 2.0 spray cup system can be used to spray paint at any angle.

How is the 3M 26024 PPS 2.0 Kit delivered?

• 50 Inner cups 850ml
• 50 Lids with 200 micron paint filter
• 32 Sealing plugs
• 1 Outer cup

How to use the 3M PPS 2.0 spray cup system?

The 3M PPS 2.0 spray cup system is easy to use. In just a few steps, you will know how to properly use the disposable cup system from 3M. Follow the steps below for this.

1. Place the disposable inner cup in the outer cup.
2. Mix the paint directly in the mixing cup.
3. Put the lid on the cup, press down and turn a quarter turn to lock the system.
4. Make sure you have the right 3M PPS 2.0 adapter for your spray gun to connect the system to your spray gun.
5. Done spraying? Disconnect the air hose and turn the spray gun to let the remaining paint run back into the cup.
6. Store the 3M PPS 2.0 cup by sealing it with the included sealing plug.