TELWIN COMPUTER 48/2 PROF is a professional battery charger for charging all types of batteries (WET) with 6/12/24/36/48V voltage. With protection against overloads and polarity reversal. Allows simultaneous charging of several batteries in series. Equipped with ammeter and voltmeter.
The TELWIN COMPUTER 48/2 PROF battery charger is a giant when it comes to professional charging of batteries. Suitable for all (wet) batteries 6, 12, 24, 36 and 48 volts to 300 Ah. The Telwin Computer 48/2 can easily connect multiple batteries simultaneously, in series.
This TELWIN COMPUTER 48/2 PROF battery charger is available for batteries with power up to 100 Ah (6 volts) and up to 300 Ah (12 to 48 volts). The charging capacity is 11A at batteries 6 volts, 30A at 12/24/36 volts and 27A batteries at 48 volts.
On the clear control panel, with large switches, you set the desired voltage and this pure battery charger will start. For batteries from small to large vehicles. From moped to boat, from tractor to excavator and everything in between: this multi-charger lets you load their batteries easily. By piece or at one time at a time. For the batteries, the lower the number of amps, the more fatter the battery, so the charger is also equipped with an amp meter. Therefore, if the number of amps decreases, the battery starts to fade. In addition to the amp meter, the charger also has a voltmeter for connected batteries and a timer with six different modes. The charger is protected from rewinding and overload.
Technical data:
- Charging voltage 6 V, 12 V, 24 V
- Charging current 11A (6V) 30A (12-24-36V) 27A (48V)
- EN 60335-2-29 7A (6V) 20A (12-24-36V) 18A (48V)
- Number of switching modes 6
- Reference Capacity 10-100 / 300/300/300/300 Ah 15h
- Absorbed power 1000 W
- Voltage 230 V
- Frequency 50-60 Hz
- Phase 1 ~
- Suitable for battery lead
- Length 280 mm
- Width [mm] 350 mm
- Height [mm] 320 mm
- Weight 12.7 kg
