RODAC Wheel Hub Grinding Discs

Grinding discs for wheel hubs

RODAC Wheel hub discs are developed to thoroughly clean wheel hubs of cars. These grinding discs remove rust, oxidation, corrosion and other deposits. In addition, they can also be used for the removal of old gaskets, seals and adhesive residues on the rims. Available in 2 different sizes.

Direct placement on an impact wrench

These discs fit every 1/2" impact wrench. Simply place the discs directly on your impact wrench, making it easier to quickly clean wheel hubs during every tire change.

Clean wheel hubs on the car

For optimum contact between the wheel hub and the wheel, it is important that the flange is thoroughly cleaned. A rusted or contaminated flange means that a wheel does not fit perfectly on the hub and also has a negative influence on the tightening moment of the wheel bolts. With a wheel hub grinding disc, cleaning the flange is a piece of cake.

Holder for wheel hub grinding disc

For the use of this grinding disc, we recommend to use the corresponding holder. This holder acts as a support disc that can be placed on your impact wrench.

Features RODAC Wheel Hub Grinding Discs

• Replaceable cleaning discs
• No flying sparks
• Minimum dust development
• Use in combination with commercially available impact wrenches. So no special processing machine needed
• Sanding disc with nylon abrasive fleece
• Suitable for almost all cars
• Quick removal of rust and deposits on discs and brakes
• Time saving
• Optimum processing quality

Grinding discs for wheel hubs available in 2 sizes

• 160mm x 65mm (RR275150A)
• 200mm x 75mm (RR275150B)