MOTIP DUPLI-COLOR Zapon Crystal Clear Coat in 400ml Aerosol
- 100 days returns & exchanges
- Customer reviews: 9.5/10 (32,281 reviews)
Quality and properties
- High quality, crystal clear acrylic lacquer
- Gloss or satin
- Excellent adhesion
- Good flowing, smooth surface
- Fast drying
- Weather resistant, light fast, UV-resistant
- After drying, scratch, shock and impact resistant
Physical and chemical properties
- Basis of the binder: acrylate copolymers
- Colour: transparent
- Odour: solvent
- Gloss: the measurement angle of 60 ° in accordance with DIN 67530 gloss: 80-90 GE
- Yield: Depending on consistency and colour of the substrate 400 ml is sufficient to provide about 1.0 to 2.0 m²
- Drying time (at 20 ° C, 50% relative humidity):
- Dust dry: after 10 minutes
- Touch dry after 50 minutes
- By-dried and polished: 24 hours
- The drying time depends on the ambient temperature, humidity and the dry film thickness
- Temperature resistance: 80 ° C
- Sustainability / stability: 10 years storage (= 10 ° -25 ° C, relative humidity 60% max.)
User
- Read before applying the warning texts carefully and attentively
- Lightly sand any surface flow to increase adhesion of the clear-coat
- The surface must be clean, dry and free of grease.
- Deck surrounding parts should
- Shake for 2-3 minutes prior to use.
- Spray a test area first on an inconspicuous area
- Spray distance 25-30 cm.
- Spray with an interval of 1-2 minutes several thin layers.
- Do not spray on resin surfaces
Tips for spraying
- Protect the object and the environment against overspray
- Temperature should be between +10 ° C and +25 ° C, max. Humidity of 60%
- Keep dry
- Protect from direct sunlight or other heat sources
- Use in places protected from the wind, only in dry weather, and in a well-ventilated area.
- More information can be found on the label
| SKU | conf_zapon-cristal |
|---|---|
| Brand | MoTip |
| Components | 1K (1-component) |
| Packing | 1 piece |
| Content | 400 ml |
| Category | Clear Coat Spray |
How long is the shelf life of clear varnish?
What is clear coat?
Clear coat is a transparent lacquer that you apply over a colour lacquer. This makes a clear coat the same as a varnish that protects the colour lacquer from scratches, discolouration by sunlight, impacts, weather, salt and more.
How do you apply clear coat?
What is the difference between clear coat and transparent?
How many layers of clear coat should I apply?
How do you remove adhesive residues
Are there adhesive residues on your car from a sticker or car wrap? Removing adhesive residues from the car can be tricky without damaging the paint. To remove adhesive residues without scratching, it’s best to use a caramel wheel. This is a rubber grinding wheel specifically designed to remove adhesive residues without damaging the car paint
How much can I spray with a spray can?
A 400ml spray can covers approximately 1.5 to 2 m², depending on the material porosity and layer thickness. For larger projects or multiple layers, we recommend accounting for an extra 10% to ensure you don't run out halfway through.
Should clear coat be applied over car paint?
Yes, you should use clear coat over 1K automotive paint to protect the color. When buying clear coat, you have options such as high-gloss, satin, and matte, as well as 1K and 2K. 2K clear coat is the original factory high-gloss finish and is the most commonly chosen varnish.