This product is in stock and readily available to dispatch. Order before 10PM (Mon to Fri) for same day shipping. Please note that custom made products have longer delivery times.
On order
This product is not in stock. We are expecting stock anytime soon and have taken backorders to secure the stock. The date shown is an indication. Please contact our customer service for an ETA.
Temporarily out of stock
We don’t have stock in our warehouse. We are expecting stock, however this can take a little longer. Once the stock arrives, the product will be available in our shop. Please contact our customer service for an ETA.
Meguiar's Ultra Pro Finishing Polish is a professional grade finishing polish that will perfect the look of your vehicle without the use of defect hiding fillers. Meaning the results you get from Meguiar’s Ultra Pro Finishing Polish will last! Meguiar’s Ultra Pro Finishing Polish will expertly buff out any light hazing or other paint defects and polish your paint surface to a perfectly smooth finish!
Remove haze, light scratches, swirls & holograms
Use Meguiar's Ultra Pro Finishing Polish on any car paint. With a light cut level of 3/10, this compound can be used to remove permanent swirls and light defects. This excellent formula will easily correct the hazing, holograms, and swirling that were caused during your compounding step, gently buffing your paint to a smooth finish!
What is the most important difference of the new M210 polish?
M21032 contains the latest formula. The lack of dusting and slinging combined with the easy wipe-off make Meguiar’s Ultra Pro Finishing Polish an excellent choice for any body shop or professional detailer.
How do I use Meguiar's Ultra Pro Finishing Polish?
Shake well before use.
Always work on a cool, properly cured paint surface.
Work one section at a time.
Dual-action polisher: Apply directly to foam pad. Set polisher to 4-5 (for MT310 set 3.800-4.800 opm’s). Apply moderate pressure on initial 2-3 passes followed with light pressure for next 2 passes. Wipe off residue immediately after each panel.
Rotary polisher: Work one section at a time. Set rotary buffer to appr. 1000-1500 RPM’s and use a foam pad. To prime new or dry pads mist on with M34 Final Inspection. Apply the compound directly to the paint surface and work in an area 5x5cm with overlapping passes. Continue working until light film remains. Wipe off residues with a microfiber wipe. For extreme gloss, apply with DA polisher (MT310) and finishing pad.
For ultimate results clean your pads frequently.
Features Meguiar's Ultra Pro Finishing Polish
Use after M110 Ultra Pro Speed Compound
Lack of dusting
Newest formula
Restores paint
Especially for removing
Haze
Light scratches
Swirls
Holograms
METHOD OF APPLICATION: Hand or DA Polisher or Rotary Buffer
Expand full description
Meguiar's Ultra Pro Finishing Polish
Meguiar's Ultra Pro Finishing Polish is a professional grade finishing polish that will perfect the look of your...
See full description
Description
Meguiar's Ultra Pro Finishing Polish
Meguiar's Ultra Pro Finishing Polish is a professional grade finishing polish that will perfect the look of your vehicle without the use of defect hiding fillers. Meaning the results you get from Meguiar’s Ultra Pro Finishing Polish will last! Meguiar’s Ultra Pro Finishing Polish will expertly buff out any light hazing or other paint defects and polish your paint surface to a perfectly smooth finish!
Remove haze, light scratches, swirls & holograms
Use Meguiar's Ultra Pro Finishing Polish on any car paint. With a light cut level of 3/10, this compound can be used to remove permanent swirls and light defects. This excellent formula will easily correct the hazing, holograms, and swirling that were caused during your compounding step, gently buffing your paint to a smooth finish!
What is the most important difference of the new M210 polish?
M21032 contains the latest formula. The lack of dusting and slinging combined with the easy wipe-off make Meguiar’s Ultra Pro Finishing Polish an excellent choice for any body shop or professional detailer.
How do I use Meguiar's Ultra Pro Finishing Polish?
Shake well before use.
Always work on a cool, properly cured paint surface.
Work one section at a time.
Dual-action polisher: Apply directly to foam pad. Set polisher to 4-5 (for MT310 set 3.800-4.800 opm’s). Apply moderate pressure on initial 2-3 passes followed with light pressure for next 2 passes. Wipe off residue immediately after each panel.
Rotary polisher: Work one section at a time. Set rotary buffer to appr. 1000-1500 RPM’s and use a foam pad. To prime new or dry pads mist on with M34 Final Inspection. Apply the compound directly to the paint surface and work in an area 5x5cm with overlapping passes. Continue working until light film remains. Wipe off residues with a microfiber wipe. For extreme gloss, apply with DA polisher (MT310) and finishing pad.
For ultimate results clean your pads frequently.
Features Meguiar's Ultra Pro Finishing Polish
Use after M110 Ultra Pro Speed Compound
Lack of dusting
Newest formula
Restores paint
Especially for removing
Haze
Light scratches
Swirls
Holograms
METHOD OF APPLICATION: Hand or DA Polisher or Rotary Buffer
Product Q&A
No frequently asked questions found for this product. View all topics in our FAQ.
