FLEX SE 16-2 Rotating Sander 125-150mm

FLEX SE 16-2 Rotating Sander 125-150mm for versatile sanding work

The FLEX SUPRAFLEX 16-2 Rotating Sander 125-150mm is a powerful sanding specialist for processing painted surfaces, wood, metal, stainless steel, and natural stone. Thanks to the strong 1600 Watt motor, this rotating sander has enough power for intensive tasks. The adjustable speed from 800 to 2,200 revolutions per minute helps you to precisely match the machine to the material and application. With a maximum disc diameter of 150 mm, you can treat both targeted and efficient larger surfaces. The ergonomically shaped SoftGrip supports comfortable and controlled operation.

Powerful sander with smart speed control

The FLEX SE 16-2 125/150 stands out due to its powerful motor and extensive VR microprocessor electronics. With this, you have access to speed selection, speed control via a tachogenerator, soft start, and temperature protection. The efficient fan and optimized air supply support good cooling of the motor and drive. Practical use has also been considered. The flat head allows the rotating sander to be comfortably used in various positions. Additionally, the machine features a protective guard with a removable edge segment, spindle lock, and a practically placed, dust-protected on/off switch.

How to best use the FLEX SE 16-2

With the FLEX SE 16-2 Rotating Sander, you achieve a well-maintained result by properly matching the sanding material and speed to the surface. The machine is suitable for various tasks, from processing wood and metal to treating painted surfaces and natural stone.

1. Choose the right sanding material: match the disc and grit size to the material and the desired sanding result.
2. Mount the backing pad: attach a suitable backing pad of up to 150 mm and check if it is securely attached.
3. Set the speed: choose a suitable speed within the range of 800 to 2,200 revolutions per minute for the application.
4. Use the handle: hold the machine firmly and make use of the ergonomic SoftGrip for optimal control.
5. Place the machine flat: position the sanding disc evenly on the work surface before moving the machine over the material.
6. Work in smooth movements: move the sander evenly over the surface for a consistent sanding pattern.
7. Use appropriate dust extraction: where possible, connect suitable extraction to keep the work area clear.
8. Check the result: assess the surface intermittently and adjust the speed or sanding material if desired.

Features of the FLEX SE 16-2 Rotating Sander 125-150mm

• 1600 Watt motor for powerful and efficient material processing
• Suitable for disc and backing pad diameters up to 150 mm
• Adjustable no-load speed of 800 to 2,200 rpm
• VR microprocessor electronics for extensive electronic speed control
• Ergonomically shaped SoftGrip for comfortable and precise working
• Optimized motor cooling through efficient ventilation and air supply
• Protective guard with removable edge segment for flexible use
• Equipped with M14 tool holder and practical spindle lock