CROP Foam Sanding Disc 150mm grit 500 - 2 pieces

Foam Sanding Disc 150mm grit 500 - 2 pads

Foam Sanding Disc 150mm grit 500 per 2 pads from CROP is special for professional smooth sanding of primer, filler, automotive paint, clear coat, paint, varnish, stain and other materials. This grit 500 sanding pad 150mm contains soft foam which absorbs pressure during sanding so you get an even scratch pattern. In addition, the foam of the sanding disc allows you to sand both flat and round surfaces nicely evenly. The CROP soft foam sanding disc 150mm is sprinkled with high-quality P000 silicon carbide grains that have a high density. As a professional or demanding DIYer, you will get a paint finish that is super smooth and beautifully matted with this foam sanding pad P500.

What sanding pad grit 500 for?

You can use the sanding pad grit 500 in your sanding process to get a super smooth surface in preparation for a new coat of paint or lacquer. Use this P500 sanding pad for such things as:

• Leveling surfaces such as smoothing putty or primer.
• Matting old paint to ensure good adhesion for new coats of paint or lacquer.
• Preparing damaged substrates, such as removing small imperfections or light oxidation.

P500 Sanding disc with foam

P500 Sanding Disc with Foam combines fine sanding grains with a flexible 5mm foam layer. This gives you maximum control during wet sanding with your sander or handheld sanding block. The soft foam distributes pressure evenly across the surface, which is crucial to prevent damage and achieve a consistent finish. This makes the P500 sanding disc perfect for sensitive materials, such as automotive paints and clearcoats, and complex shapes, such as curves and undulations. Because you can wet sand with this foam sanding pad P500, you minimize heat generation and dust formation where you get a nicer sanding pattern immediately.

Features CROP Foam Sanding Disc 150mm - P500

• Professional foam sanding discs 150mm for random orbital sanders
• Sanding discs are sprinkled with high quality SiC grit
• Excellent to use with water for professional wet sanding
• Creates beautiful scratch pattern for a professional finish
• Very wide range of grit sizes from P360 to P3000
• Contains strong Velcro for secure attachment to your sander
• Can be used on all materials and substrates
• Packaged per grit as a set of 2 foam pads
• Comparable with MIRKA Abralon