Bison PU-Tix Transparent Express 325 gram
- Weatherproof
- Paintable
- Good stability
- Dried adhesive residues can only be removed mechanically.
- Not suitable for PE, PP, PTFE and nylon (PA)
Bison PU Tix Transparent Express
Bison PU TIX is a transparent wood glue for waterproof bonding of virtually all types of wood and building materials. Bison Konstruktie Tix is very fast, tixotrope, waterproof, limited filling and 1 component.
Wood glueing
Bison wood glue is suitable for well-fitting, non-load-bearing wood constructions by means of, for example, finger joints, dovetails, mortise and tenon joints, dowels and springs. It is suitable on many substrates such as:
- gypsum
- (natural) stone
- (gas) concrete
- metal
- rigid foam
- various plastics
How do I use Bison wood adhesives?
Bison wood glue is suitable for various applications. The temperature of the environment, the glue and the materials to be glued should not be lower than +5°C. Wood moisture content between 10% and 18%.
- The surface must be clean, dust-free and dry for maximum adhesion.
- Degrease oily wood alvores well and roughen non-porous materials.
- Moisten the side to which no adhesive has been applied with a damp cloth.
- Apply the wood glue evenly and thinly using a caulking gun.
- Assemble joint within 2 minutes and clamp or press for at least 15 minutes.
- Apply an adequate coating to the glued joint for maximum water resistance.
- Remove wet adhesive residues immediately with water.
- Store in tightly closed packaging in a dry place at a temperature between +10°C and +20°C.
Characteristics Bison Construction Tix
- Paintable
- Solvent-free
- Weatherproof
- Very fast
- Limited filling; slightly effervesces
- Does not drip
- Sandable
- Tixotropic
- Transparent
- EN 204 D4