Rust-Oleum Metal Expert Designer Finish Metal Paint Cast Iron 400ml

Rust-Oleum Metal Expert Designer Finish Metal Paint Cast Iron

Rust-Oleum Metal Expert Designer Finish Metal Paint is a decorative metal paint with a beautiful metallic textured finish that has the look and feel of real cast iron. A high quality paint for use on ferrous metals, lightly textured to imitate cast iron.

Metallic paint

Metal Expert Designer Finish metallic paints were developed under the motto: paint should be pleasing to the eye! Decorative metal paints provide a cast iron look and feel. Whereas most metallic paints are seen as products to prevent or solve rust problems, this product is one of a kind. We all have some metal items in our yard or indoors that have lost their luster and glory for a while and are in need of something new.

Textured paint

With a textured paint, you give the surface a unique, slightly grainy look. This easily covers up imperfections and creates a special effect. You can use the best textured paint on both interior and exterior surfaces.

How do I use the textured paint?

Rustoleum metallic paint is easy to use without primer or primer (with the exception of untreated substrates). Use the steps below.

1. The surfaces to be painted must be dry, clean and free of paint residue, rust, wax, oil and grease. Already painted surfaces should be sanded first for better adhesion. Pre-treat untreated metal surfaces with Rust-Oleum 3-in-1 anti-rust primer.
2. Shake the spray can until you hear the mixing ball, then keep shaking vigorously for one minute (shake frequently during use as well).
3. From a distance of 30 cm, spray the paint evenly onto the surface with back and forth movements, so that the individual strips overlap slightly.
4. You achieve the best results if you always keep the can at the same distance from the surface while spraying and move it constantly.
5. Apply several thin coats and let them dry for a few minutes in between.
6. Dust dry after 30 minutes. Wait 20 minutes between applying coats.
7. Drying times apply for warm (15 °C) and dry application conditions with good ventilation. Lower temperatures and higher humidity extend drying times. 1 to 2 coats recommended.
8. After use, turn the spray can upside down and spray for 2 to 3 seconds to clean the nozzle.

Do not use on substrates that regularly get hotter than 80 °C. Use only at temperatures between 10 °C and 32 °C and humidity below 85%. Be particularly careful when preparing surfaces with coatings predating 1960. These surfaces may contain lead and be harmful to health.

Rust-Oleum Metal Expert Designer Finish Metal Paint Cast Iron Features

• Decorative metallic finish with the texture of cast iron or cast bronze
• Apply directly to rusted metal for long-term (color) protection
• Fast drying
• For indoor and outdoor use