MIRKA Abranet NC Sanding Discs 150mm for aluminum
MIRKA Abranet NC Sanding Discs 150mm for aluminum
The Mirka NC product range meets the AOEM requirements for sanding corrosion sensitive substrates like aluminium. Abranet NC contributes to a clean and safe working environment.
Mirka Abranet sanding discs is the new Non-Corrosion Product Range
The preparation of corrosion-sensitive surfaces requires an abrasive that contains the lowest possible amount of heavy metals. Aluminum-based material and the demand for AOEMs for sanding corrosive-sensitive materials is increasing. To meet this market demand, Mirka is the first factory to offer a full range of products
Why Abranet NC products?
Traditional abrasives contain significant amounts of heavy metals, such as iron, chromium and copper. During sanding, contaminants can contaminate the aluminum surface. Scratches or defects in the paint or oxide layer (eloxed aluminum), which occur after finishing, can activate the corrosion process. Parts of the car, such as fender edges, that are exposed to stone chips and other damage are also at risk. Very critical is the aftermarket repair of aluminum parts.
What's the difference?
Special raw materials are used in the NC range. These have the lowest possible amounts of heavy metal contaminants. Special procedures are applied during the manufacturing process for reduction of metal content and stable quality. Due to the special construction, NC products have a significantly lower hop amount of heavy metals than the corresponding traditional products.
MIRKA Abranet NC Sanding Discs 150mm are available in the following grits:
- P80
- P120
- P180
- P240
- P320
- P400