INDUCTOR ID Pad

1. Connect the coil to the coil handle
2. Place the coil with its area over the material
3. Press the button and guide the coil above the material in a gyratory movement
4. After heating of the material, allow the coil to cool off for at least 2 minutes.

NOTE: It is possible to use the coil to remove various adhesive stickers, sealants and gaskets which are stuck to sheet metal or metal – for example in automotive, services etc. The coil is used heating of the base material and thus softening, or alternatively, hardening of the glue, putty, etc. We recommend holding the coil around 5-15mm far from the heated material - it is possible to regulate the required temperature and heating time by changing the distance.