3M 07904 Scotch-Brite Sanding Pads AUFN Gray - Pre-Cut
€34.98
incl. VAT
€34.98
excl. VAT
€34.98
incl. VAT
€34.98
excl. VAT
-
100 days returns & exchanges
- Customer reviews: 4.63/5 (7,950 reviews)
Question about this product?
Talk to one of our specialists
3M 07904 Scotch-Brite Sanding Pads - Gray
3M 07904 Scotch-Brite Sanding Pads in the color Gray are perforated sanding fleece sheets, each measuring 115x150mm. The 3M 07904 Pre-Cut Sanding Pads are packed per 36 pieces on a sanding fleece roll. These fleece sanding pads are ideal for sanding sharp corners and edges. The sanding fleece absorbs pressure while hand sanding sharp areas, corners and edges.
Sanding before applying lacquer
Before applying lacquer, sanding is necessary! The 3M 07904 Scotch-Brite Sanding Pads in the color Gray are ideally suited for roughing/sanding the surface before applying a new lacquer or spray. The abrasive grain i.c.w. the 3M Scotch-Brite sanding fleece provides a nice even matted sanding pattern.
Specifications of 3M 07904 Scotch-Brite Sanding Pads AUFN Gray - Pre-Cut
| SKU | 3M-07904 |
|---|---|
| Brand | 3M |
| EAN | 3134375394468 |
| Size | 115 x 150mm |
| Packing | 1 piece |
| SKU | 3M-07904 |
|---|---|
| Brand | 3M |
| EAN | 3134375394468 |
| Size | 115 x 150mm |
| Packing | 1 piece |
| Type sandpaper | Sanding pads |
| Length | 150 mm |
| Width | 115 mm |
| Sander type | Manual |
| Suitable for | Paint (all) |
|
Grit
Grit size indicates how coarse or fine the sandpaper is.
A low grit (e.g., P40–P80) is coarse and suitable for quickly removing material, such as paint or rust. A medium grit (e.g., P100–P320) is ideal for smoothing surfaces and preparing for further finishing. A high grit (e.g., P320 and higher) is fine and is used for sanding between coats and achieving a smooth final result. |
medium |
| Category | Sandpaper & Abrasives |
When is this sanding roller suitable for you?
For sanding large, slightly curved painted surfaces evenly, such as doors, hoods, or boat hulls. The roller distributes the pressure over a larger surface area and is therefore more forgiving than a small sanding disc, provided you maintain light contact and set the speed low.
Read more Read less
- Large surfaces such as doors, hood, or roof: A sanding roller covers evenly without localized pressure points. With the right sanding belt and a low speed setting, you can work an entire panel evenly, even if you don't sand daily.
- Slightly curved surfaces such as a boat hull or camper body: The soft roller follows a slight curve better than a hard disc. With a finer grit belt, you stay safely on gelcoat and old paint, without quickly sanding through.
- Less suitable for small spaces or spot touch-ups: A sanding roller is too wide and too flat for rebates, round profiles, or localized damage. Use a sanding sponge, cut-to-size sanding fleece, or a small soft sanding base for that.
Product reviews
Be the first to review this product and help other customers make their decision.
Recently Viewed
