3D Wash & Wax 473ml

3D Wash & Wax for cleaning, shine, and protection

The 3D Wash & Wax is a concentrated pH-balanced car shampoo with wax that not only thoroughly cleans your car during washing but also adds extra protection and shine at the same time. The special formula removes dirt, dust, pollen, mud, greasy traffic film, and street pollution without stripping existing wax, sealant, or ceramic protection. During rinsing, a protective layer remains that ensures a smooth paint and mirror-like high gloss. Ideal as a maintenance shampoo for regular use.

Car shampoo that cleans and protects

3D Wash & Wax combines multiple steps in one wash. Special synthetic surfactants dissolve both water-soluble and greasy contamination. At the same time, the shampoo contains wax components that partially remain on the surface during rinsing. This gives the paint an extra protective layer and a smooth, high-gloss finish after each wash.

Safe for wax, sealant, and ceramic coating

Thanks to the pH-balanced formula, Wash & Wax is very suitable for vehicles with existing paint protection. The shampoo removes dirt, road grime, and traffic film without removing a previously applied wax, sealant, or ceramic coating. This makes the product excellently suited for the regular maintenance wash of a protected vehicle.

High lubricity for safer car washing

3D uses a special combination of polymers that saturate and emulsify dirt and street pollution. At the same time, the formula reduces surface tension and creates a lot of lubricity between the wash mitt and the paint. This allows dirt to be more easily removed from the surface, which helps to reduce the risk of swirls, scratches, and marring during washing.

Water-sheeting for faster rinsing and drying

The water-soluble hydrophobic polymers in 3D Wash & Wax create a strong water-sheeting effect. Water runs off the surface more easily during rinsing, leaving less standing water on the car. This makes rinsing easier, can reduce water consumption, and ensures that you have less water to dry off after washing.

Suitable for bucket, foam gun, and foam cannon

Wash & Wax can be used for a traditional hand wash with bucket and wash mitt, but is also suitable for use with a foam gun or foam cannon. The concentrated formula produces a lot of foam and combines, according to 3D, three key properties: cleaning, foaming, and easy rinsing.

Highly concentrated formula

For a traditional wash, 3D recommends only 2 oz of Wash & Wax per gallon of water, which amounts to about 59 ml per 3.8 liters of water. This means you need relatively little product per wash. The shampoo is suitable for regular use on, among others, cars, trucks, SUVs, boats, motorcycles, RVs, and airplanes.

How do you use 3D Wash & Wax?

Mix about 59 ml of 3D Wash & Wax with 3.8 liters of clean water in a clean bucket. Rinse the vehicle thoroughly beforehand to remove loose dirt, leaves, and other contamination. Start at the top and wash the vehicle with a clean wash mitt or sponge. Work section by section and rinse each treated section with clean water. After washing, rinse the entire car again thoroughly and then dry the vehicle with a suitable microfiber drying towel or forced air.

Features of 3D Wash & Wax

• Concentrated car shampoo with wax
• Combines cleaning and protecting during one wash
• pH-balanced formula
• Removes dirt, dust, pollen, and mud
• Effective against greasy traffic film and road grime
• Safe for existing wax layers
• Does not strip existing sealants
• Safe for vehicles with a ceramic coating
• Contains a special combination of synthetic surfactants and polymers
• High lubricity for a safer contact wash
• Helps reduce the risk of swirls, scratches, and marring during washing
• Creates a water-sheeting effect
• Water runs off the surface more easily during rinsing
• Can reduce the required drying time
• Built-in wax leaves a smooth protective layer
• Provides a mirror-like high gloss
• Produces a lot of foam
• Easy and complete rinsing
• Suitable for a traditional bucket wash
• Also suitable for foam gun and foam cannon
• Dosage for hand wash: 2 oz per gallon of water
• Ideal as a weekly maintenance shampoo
• Suitable for cars, trucks, SUVs, boats, RVs, motorcycles, and airplanes
• Biodegradable
• Developed with Green Technology
• V.O.C. compliant
• Made in the USA