3D Carpet Extractor Shampoo 3.78 liters

3D Carpet Extractor Shampoo for Carpet and Upholstery

The 3D Carpet Extractor Shampoo is a concentrated low-foaming cleaner for carpet cleaners and extraction machines. The professional formula is specially developed for both hot and cold water extractors and removes deeply embedded dirt, grease, grime, stains, food residues, coffee, soda, and pet pollution from carpet, fabric upholstery, and other textile surfaces. At the same time, the shampoo helps to remove unpleasant odors and restore the original fresh appearance of the fibers, without leaving sticky or hard residues.

Specially developed for hot and cold water extractors

3D Carpet Extractor Shampoo is specifically formulated for use in professional extraction machines. The cleaning solution is injected into the textile by the machine, where it loosens dirt, stains, and pollution. The extractor then sucks the liquid along with the loosened dirt out of the material. This allows you to thoroughly clean fabric surfaces while removing as much pollution and moisture as possible.

Low Foam formula protects the extraction machine

A significant advantage is the special low foam formula. In an extractor, excessive foaming in the dirty water tank can cause foam to be sucked towards the vacuum motor, which can cause damage or premature wear. Therefore, 3D Carpet Extractor Shampoo produces very little foam and is specifically developed to function smoothly in hot and cold water extractors.

Removes stubborn stains and heavy pollution

The powerful cleaning agents in the formula tackle various types of interior pollution. The shampoo removes, among other things, heavy dirt, grease, grime, foot traffic dirt, food, coffee, soda, and pet stains. This makes the product excellent for thorough interior cleaning of cars where a superficial cleaning is no longer sufficient.

Cleans and removes odors in one treatment

In addition to cleaning textiles, 3D Carpet Extractor Shampoo also helps to remove unwanted odors at the same time. During the extraction treatment, dirt and pollution are removed from the fibers, and the treated material is cleaned and deodorized in one step. This makes the shampoo ideal for intensively used car interiors and fabric surfaces where pollution and unpleasant odors have built up.

Optical brighteners for a fresh appearance

The formula contains optical brighteners that help restore the original fresh appearance of carpet and fabric upholstery. According to 3D, these work without causing the fibers to fade or discolor. Thus, not only is the pollution removed, but the material also gets a brighter and fresher appearance after cleaning.

No sticky or hard residues

After extraction, 3D Carpet Extractor Shampoo leaves no cleaning residue. The formula is sucked out along with dirt and pollution from the fibers, leaving the material clean and non-sticky. Also, carpet and fabric upholstery do not become unnecessarily hard or stiff after drying. This is important because leftover cleaning agents can actually attract new dirt.

Highly concentrated and economical to use

3D Carpet Extractor Shampoo is highly concentrated. Depending on the desired cleaning power, 3D recommends a dosage of 4 to 8 oz per 5 gallons of water. This equates to approximately 118 to 237 ml of product per 18.9 liters of water. With 1 gallon of concentrate, this can make up to about 32 gallons of ready-to-use extractor fluid.

How do you use 3D Carpet Extractor Shampoo?

Vacuum the carpet or fabric upholstery to be cleaned thoroughly first to remove as much loose dirt as possible. Then mix 3D Carpet Extractor Shampoo with water in the clean water tank of the extractor. Depending on the desired cleaning power, use about 4 to 8 oz per 5 gallons of water. Then clean the material according to the instructions of the hot or cold water extractor, so that the cleaning solution is injected and sucked up along with the loosened dirt.

Features of 3D Carpet Extractor Shampoo

• Professional shampoo for carpet cleaners and extraction machines
• Specially developed for hot and cold water extractors
• Low foam formula
• Helps prevent excessive foaming in the dirty water tank
• Suitable for carpet and fabric upholstery
• Also suitable for other textile and fabric surfaces
• Removes deeply embedded dirt
• Effective against grease and grime
• Removes pollution from heavy foot traffic
• Effective against food stains
• Removes coffee and soda stains
• Suitable for tackling pet stains
• Cleans and deodorizes in one treatment
• Helps remove unwanted odors
• Contains optical brighteners
• Helps restore the original fresh appearance of textiles
• According to 3D, does not cause colors to fade or discolor
• Zero residue formula
• Leaves fibers clean and non-sticky
• Does not leave carpet and fabric upholstery unnecessarily hard or stiff
• Highly concentrated formula
• Dosage: 4 to 8 oz per 5 gallons of water
• Approximately 118 to 237 ml per 18.9 liters of water
• 1 gallon of concentrate makes up to about 32 gallons of ready-to-use cleaning solution
• Suitable for automotive, home, office, workshop, and marine
• Developed with 3D Green Earth Technology
• Biodegradable
• Prop 65 and V.O.C. compliant