MIRKA Remint M Polish
- Water-based
- Silicone-free
- Specially designed for chemically strengthened glass
- Device must be waterproof
MIRKA Remint M
MIRKA Remint M is a polishing compound suitable for machine polishing to achieve high-gloss results after removing scratches. The polishing paste is specially formulated to restore gloss. Used devices with neglected screens are restored to new condition without having to replace the screen. It is suitable for glass used in screens of electronics such as cell phones, tablets, smartwatches, etc.
Remint product range
MIRKA Remint products consist of abrasives to be used with the special copper pads and two polishes for a phone screen repair. It is a unique process and contains no fillers. The sanding results in a smooth surface and complete removal of scratches, with the surface easily polished to as good as new condition.
Refurbished iPhone
Remint from MIRKA can really make a big difference when it comes to phone repair services for refurbishing smartphones and selling used devices. The completely safe, cheap and durable cell phone repair is ideal for refurbished smartphones. The main advantages of cell phone repair are:
- You remove the scratch so the screen does not need to be replaced (money saving).
- You restore the surface and do not fill scratches temporarily (permanent solution).
- It is easy to learn so you can keep repeating the process (consistent).
How do I remove scratches from glass?
The cost of replacing an iPhone screen is high. Thanks to Remint, you give your device an upgrade by removing the scratch in just a few minutes.
- Before you start sanding, it's important to make sure the device is waterproof. Seal any critical openings.
- Measure the scratch depth to choose the right grit abrasive (10 is the coarsest and 50 the finest). Sanding time depends on scratch depth, glass quality and phone model.
- Shake bottle well before use and make sure it cannot move while sanding/polishing.
- Sand with a small amount of sanding paste combined with the Remint copper pad on an eccentric sander (MIRKA Deros 350CV) to remove the scratch.
- Repeat the process until you have a uniform, matte surface.
- The surface can now be polished in two steps. To do this, use MIRKA Remint H (manual) or MIRKA Remint M (machine).
Depending on the depth of the scratch, a second sanding step may be required.
Features MIRKA Remint M
- Water-based
- Silicone-free
- High-gloss polishing paste
- pH 7-9
- Chestnut brown color
- Specially designed for chemically strengthened glass