Bison Wood Max
Bison Wood Max Power is an extremely strong, water-resistant, filling SMP beige wood construction adhesive. The paintable wood glue is suitable for bonding virtually all types of wood.
Wood glueing
Bison wood glue is suitable for many types of wood and many building materials such as
- gypsum
- (natural) stone
- (gas) concrete
- metal
- rigid foam
- various plastics
- wood connections
- peg-hole connections
- dowels
- springs
- facade joinery
- sandwich panels
How do I use Bison wood glue?
Bison wood glue is suitable for various applications. The temperature of the environment, the glue and the materials to be glued should not be lower than +5°C. Wood moisture content between 10% and 18%.
- The surface must be clean, dust-free and dry for maximum adhesion.
- Fatty wood alvores must be well degreased. Roughen non-porous materials.
- Apply the wood glue evenly and thinly using a caulking gun.
- Ensure sufficient layer thickness.
- Assemble joint within 30 minutes and fix at least 6 hours.
- Pressing or clamping is not necessary.
- If pressing or clamping is used, apply limited pressure to prevent too much adhesive from being squeezed out of the joint.
- Remove adhesive residue immediately after application.
- Store in tightly closed container in a dry place.
Technical specifications Wood Max Adhesive
- Basic material: SMP polymer
- Chemical resistance: Good
- Color: Beige
- Curing speed: 1 mm/24h
- Density: 1.34 g/cm³
- Elasticity: Not
- Filling capacity: Very good
- Final strength: 1100 N/cm²
- Final strength after: 24 hours. This can vary depending on the circumstances, such as materials, temperature and humidity
- Hardness: 95
- Initial adhesion after: 6 hours. This may vary depending on conditions, such as materials, temperature and humidity. 100 N/cm²
- Minimum temperature resistance: -40 °C
- Maximum temperature resistance: 120 °C
- Humidity resistance: Very good
- Paintability: Very good
- Shear strength: 1100 N/cm²
- Shrinkage: 0
- Skin formation time: 30 minutes
- Solids content approx: 100
- UV resistance: good
- Viscosity: Tixotropic
- Water resistance: Very good
- Wood adhesive classification: D4
Features Bison Wood Max
- Very high final strength (110 kg/cm²)
- Waterproof (D4)
- Solvent-free and di-isocyanate-free
- Very good filling capacity (up to 4 mm)
- Does not foam
- Ready to use
- Permanently flexible
- Paintable
- Weatherproof
- UV-resistant
- Tixotropic
- Good holding power; does not drip
- Innovative formula: patent pending
