Bison Kit 750ml

Bison Kit

Bison Kit is the best contact adhesive based on neoprene rubber for repairs that need to be fixed immediately. The contact adhesive is universally applicable and extremely suitable for materials under tension.

Strength contact adhesive

Bison Kit contact adhesive is suitable for gluing flat joints or laminating many materials. Think of:

• wood
• board
• veneer
• plastic and metal cladding sheets
• rubber (foam)
• leather
• cork
• canvas
• linoleum
• polyether foam
• shoes
• bags
• toys
• carpet
• hobby crafts

How do I use Bison contact adhesive?

Bison kit adhesive should be applied at room temperature (do not process below +10°C). The final strength of bison kit contact adhesive depends on the pressure applied. Therefore, apply as much pressure as possible over the entire surface.

1. The surface must be dry, dust- and grease-free.
2. Ensure that the relative humidity is below 65% to prevent blistering.
3. Always test on an inconspicuous part of the surface first.
4. Clean and degrease the surface.
5. Apply contact adhesive wood thinly and evenly to both surfaces with a brush.
6. Allow both parts to dry for 10 to 25 minutes.
7. Once the contact adhesive no longer pulls threads merge materials.
8. After fastening, correction is no longer possible.
9. Pat, roll or press the materials firmly together.
10. Store cool, frost-free and tightly closed.

Technical specifications

• Basic material: Neoprene rubber
• Color: Yellow / brown
• Density approx.: 0.86 g/cm³
• Flash point: K1 (<21°C)
• Minimum temperature resistance: -15°C
• Maximum temperature resistance: 70 °C
• Humidity resistance: Good
• Solid content approx.: 24
• Viscosity: Liquid

Characteristics

• Super strong
• Suitable for materials under tension
• Universally applicable
• Instantly fast
• Liquid
• Moisture and frost resistant
• Easy to process
• Temperature resistant from -40°C to +70°C