Bison Hard PVC Glue 100 ml bottle + brush
In stock
Questions about Bison? Speak to a product specialist!
Consumer rating of: 4.64/5(15.561 reviews)
Configure your bundle
Product information
Pros and cons
- Special brush included
- Liquid
- Nastable
- First 10 minutes not loadable
Specifications
Description
Bison Hard PVC Glue
Bison Hard PVC Glue is suitable for bonding sleeves, fittings, pipes with tight fit in drainage systems. The special brush ensures fast and easy processing of glue PVC.
How do I use Bison PVC adhesive?
Bonding pipes, sleeves and fittings is very easy. Follow the steps below.
- Do not apply at temperatures ≤ +5°C.
- Cut pipes squarely, chamfer and deburr.
- Clean the adhesive surface with acetone and a dry microfiber cloth.
- Apply the PVC adhesive quickly and evenly lengthwise to both bonding surfaces (pipe thick, socket thin).
- Assemble the joint immediately (it is adjustable for some time).
- Remove excess adhesive residue and do not mechanically stress the joint for the first 10 minutes.
- Close packaging tightly after use.
Technical specifications PVC adhesive
- Basic raw material: PVC solution in a mixture of solvents
- Chemical resistance: Depending on gap width, drying time, pressure, temperature, type and concentration of carrier. In general, the adhesive compound has the same chemical resistance as the material itself. Exceptions are very aggressive chemicals.
- Density approx.: 0.91 g/cm³
- Flash point: K1 (<21°C)
- Solids content approx: 21
- Viscosity: Liquid
- Viscosity Approx.: 600 mPa-s
Characteristics Bison Hard PVC Adhesive
- Liquid
- Can be welded
- THF-free
- Colorless
Bison Hard PVC Glue
Bison Hard PVC Glue is suitable for bonding sleeves, fittings, pipes with tight fit in drainage systems. The special brush ensure...
See full description
Product Q&A
Product reviews
There are currently no reviews. Be the first to review this product!
Write Your Own Review