Bison Car Mirror - Mirror Adhesive
In stock
Questions about Bison? Speak to a product specialist!
Consumer rating of: 4.63/5(15.566 reviews)
Product information
Pros and cons
- Glue outside the joint will not harden
- Fast and easy
- Saves money
- Not suitable for processing at low temperatures
Specifications
Description
Bison Car Mirror
Bison Car Mirror is a mirror adhesive suitable for attaching the rearview mirror with a metal base to the windshield. Avoid unnecessary costs by visiting the car garage.
Rearview Mirror
Replacing a broken rearview mirror is easier than you think and will save you a lot of money. It all starts with choosing the right glass adhesive; Car Mirror by Bison!
How can I glue a mirror with Bison Car Mirror?
The mirror adhesive is not suitable for processing at temperatures below +15 °C. At lower temperatures, the inside of the car (windshield) must be heated.
- Make surface thoroughly clean, dry and grease-free. Remove any old adhesive and tape residue.
- There should be no condensation on the windshield.
- Mark out where the mirror should go on the outside of the windshield exactly where the mirror was before.
- Cut the provided mesh to the shape and size of the mirror base.
- Apply the mirror glue from the syringe evenly and liberally to the metal mirror base.
- Place the mesh cut to size into the wet glue and press directly onto the marked area.
- Hold firmly for 5 minutes and avoid shifting the mirror base, otherwise you risk poor adhesion.
- Then let it harden for at least 15 minutes before setting the mirror.
- If staining has occurred, remove immediately with acetone.
Features Bison Car Mirror
- Quick and easy to use
- Vibration-resistant
- Store in a dry, cool place
Bison Car Mirror
Bison Car Mirror is a mirror adhesive suitable for attaching the rearview mirror with a metal base to the windshield. Avoid unnecess...
See full description
Product Q&A
Product reviews
There are currently no reviews. Be the first to review this product!
Write Your Own Review