TELWIN TECHNOLOGY 216HD MMA and TIG Electrode Welding Device - 180 Ampere, 81 Volt
TELWIN Technology 216HD is a portable, compact, single-phase MMA-electrode welding device 5-180 Amp with very high stability of the welding current, even with voltage fluctuations. Direct control of the transfer of welding drop. Controlling the Arc Force and Hot Start in function of the used electrode. Anti-Stick. Thermal protection and protection against over- and under voltage and motor generator (± 15%).
This lightweight welding inverter of only 10 kg at 230V, is particularly designed for frequent welders, light industry, professional do-it-yourselves or small construction workshop. Suitable for welding of coated electrodes (basic, rutile, stainless steel, cast iron) to 4 mm.
The welding inverter has excellent welding properties compared to the traditional electric welding transformers. These performances are made possible by the developed electronic steering system. The result is a constant welding arc and let the weld of rutile and basic electrodes smoothly increasing. Protected against under-, over-voltage and thermal protection. Provides despite voltage fluctuations in the mains constant welding image.
- Suitable for the following electrodes: rutile, basic, stainless steel, cast iron, etc.
- Portable, single-phase inverter welding devices
- With cooling fan for MMA welding in equal power
- Limited weight and size.
- Very high stability of the welding current, despite voltage fluctuations.
- Direct control of the transfer of the weld drop.
- Controlling the arc force and hot start function of the used electrode.
- Features an anti-stick.
- Thermal protection and protection against under- and over-voltage and overload.
- Tig torch 17V, 4 m and pressure regulator with 2 manometers available at extra cost.
Technical data:
- Voltage: 230 V
- Frequency: 50/60 Hz
- Phase: 1 ˜
- Current range: 5 ÷ 180 A
- Max. empty voltage: 83V
- Duty cycle at 40°C:180 A 30% - 125 A 60%
- Absorbed power: 5,5kW - 3,5 kW
- Generator power: 8 kW
- Power factor: 0.7 cos φ
- Isolation class: IP23
- Ø electrodes: 1.6-4 mm
Standard delivered with:
- Electrode rod
- Chipping hammer
- Grounding clamp
- Welding cap
- Convenient aluminium carrying case