This product is in stock and readily available to dispatch. Order before 10PM (Mon to Fri) for same day shipping. Please note that custom made products have longer delivery times.
On order
This product is not in stock. We are expecting stock anytime soon and have taken backorders to secure the stock. The date shown is an indication. Please contact our customer service for an ETA.
Temporarily out of stock
We don’t have stock in our warehouse. We are expecting stock, however this can take a little longer. Once the stock arrives, the product will be available in our shop. Please contact our customer service for an ETA.
Tired of spending hundreds or even thousands of dollars on polishing pads? Now you can punch out your very own 1 3/8", 2", and 2 3/4" pads in minutes from the comfort of your own shop! The XP Pad Punch Series furthers our #1 goal, which is to place the power solely into your hands to increase the efficiency and profitability of YOUR business!
What does the set contain?
Punch board (XP-O)
HPDE Plastic
Length: 25 cm
Width: 20 cm
Stryker (XP-S)
Height: 11 cm
Diameter: 4 cm
XP-1 Pad Punch
Hoogte: 6 cm
Buitendiameter: 4 cm
For 3,5 cm dia pads
Perfect size for RUPES iBrid Nano, LD-30, TA-50 and other similar polishers
XP-2 Pad Punch
Height: 6 cm
Outer diameter: 6 cm
For 5 cm diameter polishing pads
Perfect size for RUPES iBrid Nano, LD-30, TA-50 and other similar polishers
XP-3 Pad Punch
Height: 6 cm
Outer diameter: 8 cm
For 7 cm diameter polishing pads
The XP-3 Pad Punch's diameter is slightly smaller than standard 3 inch backing plate diameters, and you may ask why. And our answer to you is: A HIGHER PAD YIELD A.K.A MORE PADS PUNCHED OUT OF A STANDARD 6 INCH MICROFIBER PAD!!
How do I use the Pad Punch Kit?
Wear protective eyewear.
Secure XP-0 Punch Board directly on solid, flat concrete slab, and hand tighten XP-S Stryker securely onto any KxK V2 Punch.
Place pad on XP-0 Punch Board.
Place punch blade face down on pad.
Compress pad by holding punch down firmly.
Verify that hands and all other body parts are OUTSIDE of the strike zone.
Strike the top of the XP-S Stryker in a downward motion with a 4 lb or more dead blow hammer.
Blow out all pads after punching to ensure zero debris or metal in punched pads.
Features KXK Dynamics XP Pad Punch Kit V2
Durable Anti-Corrosive Finish
Aircraft Grade Tolerances
Punch Out Your Own Pads In Minutes!
Lower Costs On Small Pads By Over 400%
Can Be Re-Sharpened Over And Over Again!
MADE IN THE USA
Expand full description
Create your own polishing pads
Tired of spending hundreds or even thousands of dollars on polishing pads? Now you can punch out your very own 1 3/8",...
See full description
Description
Create your own polishing pads
Tired of spending hundreds or even thousands of dollars on polishing pads? Now you can punch out your very own 1 3/8", 2", and 2 3/4" pads in minutes from the comfort of your own shop! The XP Pad Punch Series furthers our #1 goal, which is to place the power solely into your hands to increase the efficiency and profitability of YOUR business!
What does the set contain?
Punch board (XP-O)
HPDE Plastic
Length: 25 cm
Width: 20 cm
Stryker (XP-S)
Height: 11 cm
Diameter: 4 cm
XP-1 Pad Punch
Hoogte: 6 cm
Buitendiameter: 4 cm
For 3,5 cm dia pads
Perfect size for RUPES iBrid Nano, LD-30, TA-50 and other similar polishers
XP-2 Pad Punch
Height: 6 cm
Outer diameter: 6 cm
For 5 cm diameter polishing pads
Perfect size for RUPES iBrid Nano, LD-30, TA-50 and other similar polishers
XP-3 Pad Punch
Height: 6 cm
Outer diameter: 8 cm
For 7 cm diameter polishing pads
The XP-3 Pad Punch's diameter is slightly smaller than standard 3 inch backing plate diameters, and you may ask why. And our answer to you is: A HIGHER PAD YIELD A.K.A MORE PADS PUNCHED OUT OF A STANDARD 6 INCH MICROFIBER PAD!!
How do I use the Pad Punch Kit?
Wear protective eyewear.
Secure XP-0 Punch Board directly on solid, flat concrete slab, and hand tighten XP-S Stryker securely onto any KxK V2 Punch.
Place pad on XP-0 Punch Board.
Place punch blade face down on pad.
Compress pad by holding punch down firmly.
Verify that hands and all other body parts are OUTSIDE of the strike zone.
Strike the top of the XP-S Stryker in a downward motion with a 4 lb or more dead blow hammer.
Blow out all pads after punching to ensure zero debris or metal in punched pads.
Features KXK Dynamics XP Pad Punch Kit V2
Durable Anti-Corrosive Finish
Aircraft Grade Tolerances
Punch Out Your Own Pads In Minutes!
Lower Costs On Small Pads By Over 400%
Can Be Re-Sharpened Over And Over Again!
MADE IN THE USA
Related products
Product Q&A
No frequently asked questions found for this product. View all topics in our FAQ.
