Alabastine Grout Freshener White 220ml

Alabastine Grout Renewal

Alabastine Grout Freshener is suitable for repainting and freshening up joints. It can be used in damp spaces and is scrub-resistant. The built-in sponge makes it very easy to apply grout fresh.

Grout Freshener

Grouting in damp rooms discolors through daily use. Grouting becomes dirty due to dirt accumulating in the joints, such as dust, soap residue and limescale. Alabastine Grouting Fresh is a unique product for coloring or recoloring grouting between glazed wall tiles.

How do I use alabastine grout white?

Unfortunately, grout white cannot be applied to floor tiles because it cannot withstand stress and will wear off. Follow the step-by-step plan below to apply grout white.

1. Cover the plumbing, floor, etc. thoroughly.
2. It is very important to thoroughly clean the grout (especially grease and soap residue should be removed).
3. Then rinse and allow to dry thoroughly.
4. Treat stubborn deposits and hard, smooth joints carefully with a steel brush.
5. Shake the tube before use.
6. Unscrew cap and remove seal, screw cap back on and remove cap.
7. Apply directly to joints from the tube.
8. Allow Joint Fresh to dry for at least one hour.
9. Moisten a small area with a plant sprayer and let it soak in for ± 5 min.
10. Remove Voegenfris from the tiles with a wet sponge. If Voegenfris adheres well to the joints, the entire surface can be cleaned.
11. If Voegenfris comes loose from the joints, repeat the same procedure one hour later.
12. If Voegenfris cannot be easily removed from the tiles, moisten again with a plant sprayer and/or scrape off with a wooden or plastic object.
13. Applying a second coat of Voegenfris is possible after 3 weeks (also over another color).

Characteristics Alabastine Grout Freshener

• For freshening up and re-colouring joints
• Easy to apply thanks to the handy built-in sponge
• Suitable for damp spaces
• Can be repainted after 3 weeks
• For inside use
• Dirt-repellent
• Hot water resistant