Meguiar's Mirror Glaze Foam Cut Compound
Meguiar's Mirror Glaze Foam Cut Compound is a very coarse polish with an Extra Heavy Cut level of no less than 12/12! Ultra fast & reliable sanding mark removal with minimal pad sling and fast wipe-off. Buffered super-micro abrasives provide extended buffing cycle/working time.
Specially formulated for foam cutting pads!
Meguiar's Mirror Glaze Foam Cut is known for its super fast cut. Ultra fast & reliable sanding mark removal. Minimal pad sling & fast wipe off for excellent clean-up performance.
Repair all types of paint defects!
Meguiars M101 Foam Cut Compound is an ultra coarse compound that is designed to repair all types of paint defects, including swirls, oxidation, abrasive scratches and basically anything that hinders the appearance of car paint. Specifically formulated for ultimate pad performance. Use with a foam cutting pad for controlled defect removal on high-solid, fresh-paint finishes. Meguiars M101 Foam Cut Compound offers a finish that is usually expected from a polish and not from a compound. Meguiars M101 Foam Cut Compound may be used with or without water mist.
How do I use Meguiar's Mirror Glaze Foam Cut polish?
- Shake well before use.
- For best results, prime dry pad by applying compound directly to the pad face.
- Work one section at a time.
- Rotary buffer: Work surface with rotary buffer to approximately 900-1500 rpm. Use moderate downward pressure until sanding marks are removed. Re-apply if necessary.
- Wipe off final residue with a clean microfiber towel.
- For increased cut rate pure water may be misted onto surface or wool pad may be used.
- For maximum lustre, continue with Meguiar's M20532 Ultra Finishing Polish.
- Clean pad frequently.
Features Meguiar's Mirror Glaze Foam Cut Compound
- Globally VOC-compliant formula
- High gloss final finish
- Removes 1500 grit and finer sanding marks
- Especially for removing:
- Swirls
- Oxidation
- Sanding marks
- Defects
- METHOD OF APPLICATION: Rotary buffer
