BELTON SPECIAL Stainless Steel Effect in 400ml Aerosol

Application:
For decorative paintwork and repairs in an attractive stainless steel look. Suitable for painted objects made of metal, wood, stone, clay, ceramics, glass and cardboard/paper. If special primers are used, it is also suitable for use on plastics and polystyrene..

Product benefits:

• High-quality stainless steel look
• Shiny metal
• High coverage and fast drying
• Very good flow properties and easy to process
• High yield
• Weather resistant, for indoors and outdoors
• For decorative objects and repairs

Technical specifications:

• Binding agent base: Nitro combination resins
• Spray application: for 2-3 cross coats: approx. 40-50 μm
• Spray distance: 15-25 cm
• Drying times:
  - dust-dry: after approx. 10-15 min.
  - fast-to-handling: after approx. 30 min.
  - dry-hard: after approx. 12 hours
  - recoating: with itself: at any time with clearcoat: after 30 minutes

Paint structure:

• Metal:
  1. belton basic anti-corrosion primer (outdoor)
  2. belton basic universal primer
  3. belton special Stainless Steel effect
  4. belton clearcoat for all effects
• Wood:
  1. belton basic wood primer
  2. belton special Stainless Steel effect
  3. belton clearcoat for all effects
• Plastic:
  1. belton basic plastic adhesion primer
  2. belton special Stainless Steel effect
  3. belton clearcoat for all effects
• Polystyrene:
  1. belton basic polystyrene primer
  2. belton special Stainless Steel effect
  3. belton clearcoat for all effects

Note:
Please check the compatibility of plastic surfaces. All other surfaces, such as e.g. stone, clay, ceramics, glass, rattan/bast, card/paper need to be primed with belton universal primer. Do not spray onto synthetic resin coated surfaces because the paint may lift. The surface to be painted must be clean, dry and free of grease.