Peinture automobile et consommables: le plus grand assortiment d’Europe! Le plus grand assortiment d’Europe!

RustOleum SuperGrip Nez de marche antidérapant intérieur

Notation:
% of 100
0 avis
Commandé avant 22:00, envoi le même jour
Temporairement en rupture de stock
Immédiatement disponible / En stock

Ce produit est disponible immédiatement et est en stock. Commandes placées avant 22.00, seront envoyés le même jour. Attention, pour commandes avec produits sur-mesure (peinture automobile) un délai de livraison différent s'applique.

Commandé chez le fournisseur

Ce produit n'est pas disponible immédiatement. Le produit a été commandé auprès de notre fournisseur et nous nous attendons qu'il arrive bientôt. La date de livraison est une indication. Contactez notre service clientèle pour plus d'informations sur la date de livraison précise.

Temporairement en rupture de stock

Ce produit est temporairement en rupture de stock. Le produit a été commandé auprès de notre fournisseur et nous nous attendons qu'il arrive bientôt. Le produit sera donc à nouveau disponible bientôt dans notre boutique. Vous avez des questions? Contactez notre service clientèle pour plus d'informations sur la date de livraison précise.

88,81  74,01 € Prix en détail 104,48 
Avez-vous des questions sur Rust-Oleum? Consultez un spécialiste!
Évaluation des clients: 4.49/5(16.640 évaluations)
Compilation d'un ensemble
Rust-Oleum SuperGrip Anti-Slip Step Covers Exterior
RustOleum SuperGrip Nez de marche antidérapant intérieur
Rust-Oleum Anti-Slip Spray in spuitbus 500ml
RustOleum SuperGrip Peinture anti-dérapante en aérosol de 500ml
Tapis antidérapant pour pneus de voiture avec adhérence et traction - lot de 2 pièces
Tapis antidérapant pour pneus de voiture avec adhérence et traction - lot de 2 pièces
remise sur les accessoires
Prix en détail
RustOleum SuperGrip Nez de marche antidérapant intérieur
RustOleum SuperGrip Peinture anti-dérapante en aérosol de 500ml
Informations sur le produit
Avez-vous des questions sur ce produit?
Caractéristiques
SKU conf_RO-SGTTI
Résistance à la chaleur 80° C
Taille 345mm
Fabricant Rust-Oleum
Toutes les caractéristiques
Emballage per stuk
Afficher toutes les caractéristiques

Caractéristiques

SKU conf_RO-SGTTI
Résistance à la chaleur 80° C
Taille 345mm
Fabricant Rust-Oleum
Emballage per stuk
La description

Rust-Oleum SuperGrip Anti-Slip Step Cover Indoor is a heavy duty preformed Anti-Slip step cover with a fine surface for interior use providing a corrosion resistant surface for damaged, worn or slippery steps. Easy to fix with glue and screws. Ready to fix Anti-Slip panels. Outlives all other Anti-Slip applications. Easy to fix with glue and screws. Heat resistance from -20° C. to +80° C

  • Available colours:
    • Black / White
    • Black / Yellow
  • Available sizes:
    • 600mm x max. 450mm
    • 750mm x max. 450mm
    • 800mm x max. 450mm
    • 1000mm x max. 450mm
    • 1200mm x max. 450mm
    • 1500mm x max. 450mm
    • 2000mm x max. 450mm
    • 3000mm x max. 450mm
    • 1000mm x max. 1200mm
    • 1200mm x max. 1200mm
    • 2400mm x max. 1200mm

SAFETY
When installing Anti-Slip panels, standard personal protective equipment should be worn as a minimum. These include a dust mask, safety goggles, heavy-duty gloves and overalls. Dry fit all Anti-Slip panels to ensure that they fit freely and that they sit flat down on to the surface. Drill the fixing locating holes in all the panels. Whilst individual circumstances will vary, the following can be used as a guide:

INSTRUCTIONS FOR USE
The items are generally glued and screw fixed. Adhesive Mastic is ideal since it will make up minor deviations in the substrate and prevent the panels drumming or rocking. The Adhesive Mastic should be applied to sound, clean dry surfaces if it is to be the only method of fixing in lightly trafficked areas. If application is to damp, dirty or friable surfaces or in very cold weather, use the Adhesive Mastic to bed the Anti-Slip panel into place and then always screw fix. Screw fixings are generally made at about 600mm intervals.

TRIMMING
The Anti-Slip material is quite tough to cut. So if required, the Anti-Slip panels can be trimmed on site to suit using an industrial jigsaw and appropriate cutting blades (Bosch “T101 A1F” or similar are ideal).

FIXINGS
If mechanical fixing is required, the following may be used as a guide. - To timber: No.8 x 30mm zinc plated or stainless steel screws. - To steel plate: No.8 x 20mm self-tapping pan head Pozi stainless steel screws or No.8 x 20 mm self drilling pan head Philips zinc plated screws. - To concrete: No. 8 x 30 mm zinc plated or stainless steel impact anchors (Hilti HPS-1 or similar). - To open mesh: Stainless steel or zinc plated saddle clips and domed head bolts suitable in length for the depth of the existing treads.

COUNTERSINKING
When drilling holes in the panels we do not recommend countersinking

PREPARATION
Very little preparation of the substrate is required. It should be reasonably clean and dry if the Adhesive Mastic is to be the only means of fixing. Badly dished or holed concrete etc should ideally be filled. The Adhesive Mastic will take up minor undulations and imperfections.

DRILLING
Hold the Anti-Slip panel in place and drill through the panel and into the substrate. A rawlplug will probably be required in a concrete base. The drill hole in the panel does not need to be larger than that drilled into the substrate.

Voir la description complète
Rust-Oleum SuperGrip Anti-Slip Step Cover Indoor is a heavy duty preformed Anti-Slip step cover with a fine surface for interior use providing a corro...
Afficher la description complete
La description

Rust-Oleum SuperGrip Anti-Slip Step Cover Indoor is a heavy duty preformed Anti-Slip step cover with a fine surface for interior use providing a corrosion resistant surface for damaged, worn or slippery steps. Easy to fix with glue and screws. Ready to fix Anti-Slip panels. Outlives all other Anti-Slip applications. Easy to fix with glue and screws. Heat resistance from -20° C. to +80° C

  • Available colours:
    • Black / White
    • Black / Yellow
  • Available sizes:
    • 600mm x max. 450mm
    • 750mm x max. 450mm
    • 800mm x max. 450mm
    • 1000mm x max. 450mm
    • 1200mm x max. 450mm
    • 1500mm x max. 450mm
    • 2000mm x max. 450mm
    • 3000mm x max. 450mm
    • 1000mm x max. 1200mm
    • 1200mm x max. 1200mm
    • 2400mm x max. 1200mm

SAFETY
When installing Anti-Slip panels, standard personal protective equipment should be worn as a minimum. These include a dust mask, safety goggles, heavy-duty gloves and overalls. Dry fit all Anti-Slip panels to ensure that they fit freely and that they sit flat down on to the surface. Drill the fixing locating holes in all the panels. Whilst individual circumstances will vary, the following can be used as a guide:

INSTRUCTIONS FOR USE
The items are generally glued and screw fixed. Adhesive Mastic is ideal since it will make up minor deviations in the substrate and prevent the panels drumming or rocking. The Adhesive Mastic should be applied to sound, clean dry surfaces if it is to be the only method of fixing in lightly trafficked areas. If application is to damp, dirty or friable surfaces or in very cold weather, use the Adhesive Mastic to bed the Anti-Slip panel into place and then always screw fix. Screw fixings are generally made at about 600mm intervals.

TRIMMING
The Anti-Slip material is quite tough to cut. So if required, the Anti-Slip panels can be trimmed on site to suit using an industrial jigsaw and appropriate cutting blades (Bosch “T101 A1F” or similar are ideal).

FIXINGS
If mechanical fixing is required, the following may be used as a guide. - To timber: No.8 x 30mm zinc plated or stainless steel screws. - To steel plate: No.8 x 20mm self-tapping pan head Pozi stainless steel screws or No.8 x 20 mm self drilling pan head Philips zinc plated screws. - To concrete: No. 8 x 30 mm zinc plated or stainless steel impact anchors (Hilti HPS-1 or similar). - To open mesh: Stainless steel or zinc plated saddle clips and domed head bolts suitable in length for the depth of the existing treads.

COUNTERSINKING
When drilling holes in the panels we do not recommend countersinking

PREPARATION
Very little preparation of the substrate is required. It should be reasonably clean and dry if the Adhesive Mastic is to be the only means of fixing. Badly dished or holed concrete etc should ideally be filled. The Adhesive Mastic will take up minor undulations and imperfections.

DRILLING
Hold the Anti-Slip panel in place and drill through the panel and into the substrate. A rawlplug will probably be required in a concrete base. The drill hole in the panel does not need to be larger than that drilled into the substrate.

Questions et réponses sur ce produit
Il n'y a pas de questions fréquemment posées pour ce produit. Consultez toutes les questions fréquemment posées dans notre FAQ.
Toutes les questions fréquemment posées
Avis sur les produits
Serez-vous le premier à donner un bon avis à ce produit? Vous nous aiderez beaucoup!
Rédigez votre propre commentaire
Vous révisezRustOleum SuperGrip Nez de marche antidérapant intérieur
Votre notation
© Car Repair Online Products