RustOleum EPOXYSHIELD Vernis anti-poussère/primaire 5 litres

Rust-Oleum EPOXYSHIELD SEALER for concrete

Rust-Oleum EPOXYSHIELD SEALER is a one component, water-based, concrete sealer based on a vinyl acrylic binder. It reduces dust production, protects the floor against liquid/chemicals and simplifies cleaning.

1K Protective Layer for Floor Coating

Rust-Oleum EPOXYSHIELD SEALER is a 1-component concrete sealer that can easily be applied to concrete floors. It creates a protective layer so paint is protected against liquid and chemicals. The 1K EPOXYSHIELD SEALER is extremely fast drying!

Can also be used as primer

When EpoxyShield Sealer is used as a finish, apply 2 coats. EpoxyShield Sealer can also be used as a sealer/impregnation primer for EpoxyShield 5200 ULTRA. Apply the sealer on bare and clean concrete floors.

How do I apply Rust-Oleum EPOXYSHIELD SEALER?

Apply the product only on fully clean and dry concrete surfaces. Do not apply on smooth or very dense concrete or concrete which contains curing compound. Remove all oil, grease and other dirt using EpoxyShield Cleaner/Degreaser 2901. New concrete has to cure for minimal 30 days. All laitance, loose or unsound concrete should preferably be removed by blasting, cutting or etching with RUST-OLEUM Surfa-Etch 108 Etching Solution. Repair all holes and cracks with EpoxyShield concrete repair products. Very dense and smooth concrete should first be abrasive blasted (or etching). During application the substrate should be clean and dry.

Features Rust-Oleum EPOXYSHIELD SEALER

• 1-component
• Single pack, easy to apply
• Non yellowing clear finish (glossy)
• Waterbased
• Protects against moisture and road salts
• Touch dry after just 1 hour
• Ideal primer for EPOXYSHIELD Ultra Coatings
• Tack free after 60 minutes
• Paintable: after 6 hours
• Walkable: after 8 to 12 hours
• Consumption: 1 liter per 10 square meters