The Power Liquid Piston Pump is the easiest and fastest way to pump a fluid from a reservoir and bring it into another.
Power Liquid Piston Pump is an aluminium tube (self-priming valve) with a special marble and a spring attached to a crystal clear hose of 185cm. Provide some level difference, place the tube in the blank pumping space (for example, a container, shake the tube to the hose up and down until the hose is 3/4 filled with liquid, and plug the other end into the bubbler. Thanks to the priming valve begins the liquid to run automatically.
Simple, fast, secure transfer with the Power Liquid Piston Pump. No more spills and no more worrying for only € 20, -!
Some characteristics of the Power Liquid Piston Pump:
- Simply transferring liquids
- Works with almost all liquids such as water, petrol, diesel, kerosene, oil, wine, fruit juices, fertilizers, detergents etc.
- Capacity: 10 litres per minute
- Comes with a 185cm long, clear glass tubing
Practical tips from the Power Liquid Piston Pump :
- Do you want to interrupt the fuel, to check the level, you can simply squeezing the tube, and then release the hose and pump naturally resuming transfer
- Ensure that the pump remains on the bottom of the tank and no air gasps (because the pump stops with siphon)
- Always from high to low
- If the hose is too long, then short it so you do not have any bends in the hose. (Or move it further away from the tank filler neck
- Always shake with one hand
With the Power Liquid Piston Pump you never need:
- Spill
- A foul stench
- Heavy lifting
- A funnel needed
- Water pollution
- Suction the mouth
- A dirty taste
