Quality and features:
- High-quality metallic acrylic dispersion
- Let magnets hold
- Water based
- Excellent adhesion and coverage
- For indoor applications,
- Can also be used on curved surfaces
- Can be painted with latex paint
- Papered over with a thin carpet is possible
- Colour grey
Physical and chemical properties:
- Binder: Acrylic / Alkyd
- Colour: grey
- Odour: neutral
- Gloss: matt (measurement angle of 60 ° in accordance with DIN 67530)
- Coverage: Depending on the layer thickness is 1 litre is sufficient for about 2-3 m² (two layers)
- Drying time (at 20 ° C, 50% relative humidity):
- Thumb hard at a wet film thickness of 100 microns after 2-3 hours
- To touch after about 3 hours.
- Transferred recoat with itself after 3-4 hours.
- The drying time depends on the ambient temperature, humidity and thickness of the applied layer.
- Optimum processing temperature: Room temperature: 15-25 ° C
- Cleaning of tools: with water
- Shelf Life / Storage: 1 year when stored in closed original container provided (= 10 ° -25 ° C, relative humidity 60% max.). Keep from freezing!
Instructions:
- Read before applying the warning texts on the label carefully and attentively.
- The surfaces to be treated thoroughly clean, dry and grease
- Surrounding parts carefully covered splash
- Remove old paint and sanding
- If desired (highly absorbent substrates) first DUPLI-COLOR Primer.
- Smooth and painted surfaces such as doors) before sanding lightly.
- Magnetic Paint is not suitable for outdoor applications
- Do not use in places that are exposed to moisture.
- Before application, the coating should be stirred well so that the metal particles are mixed well with the varnish.
- The lacquer must not be mixed with a different lacquer or water.
- Apply paint preferably with a paint roller carefully as you normally would with identical finishes.
- Allow the first coat to dry 3-4 hours.
- You then transfer the second layer of the magnetic paint. At 100 microns 2-3 layers), the magnetic effect is sufficient for normal household magnets.
- For increased magnetic effect, the surface may be painted as desired more times.
- When the surface is dry (at least 6 hours) the magnetic paint can be covered with a thin layer of wallpaper with any desired dispersion in any desired colour
